A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

OOPs...

  • funkyjimny
  • Topic Author
  • Offline
  • Moderator
  • Moderator
    Registered
  • 2004 jimny soft top, factory hardtop, ARB bumper
More
11 Nov 2009 12:48 #1449 by funkyjimny
OOPs... was created by funkyjimny
ripped the OSF lower shock mount off the axle while laning on Sunday.... really must be more careful!

Gary
[img
www.CodeAV.com
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Nov 2009 15:32 #1450 by Baz2236
Replied by Baz2236 on topic Re:OOPs...
Snap I have done the same thing both sides. I got them welded back on and seem alright for now but might look into beefing up the mounts a little.

Please Log in or Create an account to join the conversation.

  • funkyjimny
  • Topic Author
  • Offline
  • Moderator
  • Moderator
    Registered
  • 2004 jimny soft top, factory hardtop, ARB bumper
More
11 Nov 2009 16:36 #1452 by funkyjimny
Replied by funkyjimny on topic Re:OOPs...
not done it on any of my other jimnys though. I'll weld them back on and then plate over for strength.

Gary
www.CodeAV.com

Please Log in or Create an account to join the conversation.

More
11 Nov 2009 17:16 #1454 by s2quattroturbo
Replied by s2quattroturbo on topic Re:OOPs...
Aye i ripped one o them off too, the metal seems a bit thin for the forces that are put through them, could really do with heavier mount to take the bashing they get.

Please Log in or Create an account to join the conversation.

Time to create page: 0.128 seconds
Joomla template by a4joomla