A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
I have just finished fitting my rear disk conversion, Its great I now have a hand brake 3 clicks and its not moving anywhere. I used the muddyzook bearing retainer on one side as the bearing knackered and cut down the drum back plate for the other side. Had a bit of messing about stopping it from rubbing on the caliper mount but once done it was well worth it. All I need to do is secured the pipes with some new P clips and jobs a good un. I also fitted LWB Vit front disks and calipers so the front brakes are even better as well.
