A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

G13BB engine

More
24 Mar 2011 19:41 #13986 by xs4two
G13BB engine was created by xs4two
Hi guys (and girls?)

Got a major problem with my jimny. Blown the head gasket, pulled the head of and we noticed some damage on the 3th cylinder. We took the engine to a man who could overhaul it but he says the damage is to big :-S

So I will have to find another engine, but the G13BB is a bit "rare" overhere. They ask over 1000 euro's if wreckers have one. My question is: does a G13BB engine of a wagon R+ will fit? Some wreckers say it don't because there is a "horsepower differents" in it. They can't garantee me if it will fit. I also know that the 2wd jimny and some baleno's have the G13BB engine overhere....

Regards Henry - The Netherlands

Please Log in or Create an account to join the conversation.

  • adamjimny
  • Visitor
  • Visitor
    Public
25 Mar 2011 06:27 #14013 by adamjimny
Replied by adamjimny on topic Re: G13BB engine
no they do not fit as far as im aware as if i remember correctly the exhaust manifold doesn't match etc so could only guess what else doesn't mate up.

why not find a g16bb engine cheap and upgrade the engine.....only if they are cheaper of course but they are simple to fit.

Please Log in or Create an account to join the conversation.

  • biggaz
  • Visitor
  • Visitor
    Public
25 Mar 2011 12:46 #14046 by biggaz
Replied by biggaz on topic Re: G13BB engine
I know Kev on here who was at tong, fitted a Brand New engine in his older jimny which came from a car (ignis maybe?) needed a few things swapping over though as it was mounted the ohter way in the car, maybe sump and oil pump etc....

Please Log in or Create an account to join the conversation.

Time to create page: 0.109 seconds
Joomla template by a4joomla