A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Hello, I used to have a 54 plate jimny with a 3'' lift, snorkel, all the kit you can imagine but sold it..............
I'm about to buy a 2005 vvt Jimny and do a bit of gentle modifying (went way too far with my old one and made it a nightmare to drive anywhere but offroad) and am wondering if the TJM snorkel will fit the new engine (it looks v similar to the old one......). Also has anyone had any issues with the push button 4wd? I wanted to get a pre-facelift model to get the 2nd lever rather than a button now I'm not so sure..
The TJM catalogue states that it only fits up to October 2005, which I guess is when the VVT engine appears.
However, the only part of the car it connects to is the airbox, so if the airbox is the same shape and size and is in the same location then I cannot see why it will not fit.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
