A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

vacuum hub fault.

  • retroglasgow
  • Topic Author
  • Visitor
  • Visitor
    Public
11 Jan 2011 16:29 #9389 by retroglasgow
vacuum hub fault. was created by retroglasgow
flashing 4wd light,1st i replaced all the metal/rubber vacuum pipes which had rusted through,with diesel leakoff tubes bought tee pieces,all fitted.then still had flashing 4wd.i then replaced two more from the pressure switch down,this briefly held the 4wd light on constant,so i thought happy days.two minutes later flashing light back on.could this be a faulty pressure switch..or something else,what would you guys suggest...thanks in anticipation.

Please Log in or Create an account to join the conversation.

  • Gromit
  • Visitor
  • Visitor
    Public
11 Jan 2011 17:58 #9391 by Gromit
Replied by Gromit on topic Re: vacuum hub fault.
Do what I did mate, bin the auto hubs and fit some manual ones off an SJ.

Please Log in or Create an account to join the conversation.

  • zukhunter
  • Visitor
  • Visitor
    Public
11 Jan 2011 18:02 - 11 Jan 2011 18:04 #9392 by zukhunter
Replied by zukhunter on topic Re: vacuum hub fault.
hi welcome to the forum

check the search box on the forum top of page (right hand side)
theres write ups and photos that will help you
hope this helps good luck
Last edit: 11 Jan 2011 18:04 by zukhunter.

Please Log in or Create an account to join the conversation.

  • retroglasgow
  • Topic Author
  • Visitor
  • Visitor
    Public
11 Jan 2011 18:03 #9393 by retroglasgow
Replied by retroglasgow on topic Re: vacuum hub fault.
hi cheers for the reply.looking into that in the future,hopefully trying the pressure switch will do the trick..still trying to locate one..thankyou.

Please Log in or Create an account to join the conversation.

  • gazert
  • Visitor
  • Visitor
    Public
11 Jan 2011 18:11 #9395 by gazert
Replied by gazert on topic Re: vacuum hub fault.
Bn them and seal off the two pipes running to the hubs(this fools the light into thinking the hubs are engaged)
Fit avm jimny manual hubs. No adapter plate needed!

Please Log in or Create an account to join the conversation.

Time to create page: 0.135 seconds
Joomla template by a4joomla