A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Brake lines and body lifts
- MrandMrsHart
- Topic Author
- Offline
- New Member
-
Registered
14 Jul 2026 09:40 #264927
by MrandMrsHart
Brake lines and body lifts was created by MrandMrsHart
Hi guys.
yesterday i finally decided to do my body lift on my jimny. 3 inch lift to go with the 2 inch lift i already had on the suspension. Todays job was tacking the brake likes but i am confused….
Thenkit came with three lines. One is quite clearing left front as it has the bracket part way down, I'm presuming therefore the other is front right, but the. There is one further hose which has matching ends which i cant for the life of me work out where it goes. I also notice then under the car where there are two other hoses are under a lot of strain and some digging i found that lambert do a kit for this which i will be purchasing as i believe its pulled the bolt out of the bulk head slightly
anyway if anyone can tell me where this extra hose goes with two of the same flare ends on i would be most grateful
yesterday i finally decided to do my body lift on my jimny. 3 inch lift to go with the 2 inch lift i already had on the suspension. Todays job was tacking the brake likes but i am confused….
Thenkit came with three lines. One is quite clearing left front as it has the bracket part way down, I'm presuming therefore the other is front right, but the. There is one further hose which has matching ends which i cant for the life of me work out where it goes. I also notice then under the car where there are two other hoses are under a lot of strain and some digging i found that lambert do a kit for this which i will be purchasing as i believe its pulled the bolt out of the bulk head slightly
anyway if anyone can tell me where this extra hose goes with two of the same flare ends on i would be most grateful
Please Log in or Create an account to join the conversation.
Time to create page: 0.448 seconds