A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Stereo advice

Lambert
Topic Author
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

07 May 2025 19:18 #260324 by Lambert

Stereo advice was created by Lambert

Whatcha, something of an expert level question I need assistance with. If my new project manifests itself which is looking more promising than ever I would like to be able to put decent size speakers in the back. Not currently a problem with the rear deck in place as they are part of that but I will be keeping the back seats in the project and yes I could use the B pillar factory positioning but it's limited to a 100mm cone and I'm wanting something more like a 160 to175mm cone like in the deck. I also absolutely won't be letting them into any of the plastic panels as I want it to look factory. I'm also looking to make a sub enclosure that levels the boot floor to match the rear seats when folded but that's going to be for a sub not full range speakers and it would give quite an odd sound stage from back there. So some clever ideas for oversized rear speakers in a gen3 with rear seats please.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

Time to create page: 0.121 seconds

Stereo advice

Events Menu