A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

How do I decide on a Jimny?

More
03 Nov 2024 17:13 #258160 by Spice4x4
Looking at buying a Jimny for deer management.  It will be a second car so won’t do huge miles.  
coming to conclusion that mechanically they are pretty solid and I can do bits myself mechanically. History is a bonus. 

how worried should I be about corrosion?  Looked at a few and been put off, especially as sellers are claiming they are solid examples?  Should I just be accepting that they will be rust?  Is it always repairable or are they examples out there where repair is just not feasible??

Any advice appreciated.

Please Log in or Create an account to join the conversation.

More
03 Nov 2024 18:34 #258163 by Motacilla
opening a can of worms with that question

tin worms

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
03 Nov 2024 18:35 #258164 by Lambert
Replied by Lambert on topic How do I decide on a Jimny?
It's one of those things that depends on how competent you are with rust repairs. If you are then anything is doable if however you would have to pay someone then it makes more sense to spend money on a better clean car. It really is down to you.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: Spice4x4

Please Log in or Create an account to join the conversation.

More
03 Nov 2024 18:36 #258165 by DrRobin
Replied by DrRobin on topic How do I decide on a Jimny?
It might help us to know what sort of year you are looking at?

Unfortunately Jimny's do rust. It's not un-common to see surface rust underneath on a 4 year old Jimny and the older they get, the more they rust. All because the body and paint work is nice and shiny, doesn't mean there is rust underneath the vehicle.

A Jimny does have a proper chassis and this can get surface rust on it, but that won't be a problem. Most of the problem areas for rust are associated with the chassis, the main places are

- behind the headlights
- the body mounts
- the upper suspension mounts
- the small boot pan

All of these can be fixed by cutting out the section and welding a new piece in but it's time and effort or cost. Have a look at the BigJimny Wiki about common problems and in particular rust (link below), it shows the common areas and provides details about fixing the issues.

www.bigjimny.com/mediawiki/index.php/Common_problems_-_overview

Sorry don't want to put you off, but best to go in to this armed with all of the knowledge. It sounds like you have already seen some examples and decided not to proceed.

Hope that helps

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

The following user(s) said Thank You: Spice4x4

Please Log in or Create an account to join the conversation.

More
06 Nov 2024 07:59 - 06 Nov 2024 08:00 #258199 by Rogerzilla
There was also a production period in the 2000s where manual Jimnys had weak gearboxes.  These will be long out of warranty so it could get expensive. Good used manual gearboxes without the same issue aren't easy to find.

Always check 4WD engages, as the vacuum locking system suffers from rusted pipes and the hub seals can leak too much air for locking to take place.  It's easily fixed but a point for negotiation.

Crankshaft pulleys can separate after 10 years or so and the bearing on the PAS/aircon tensioner pulley can fail.  The drivebelts are generally quite annoying on a Jimny as there is little space between them and the radiator, which officially has to be removed to change or tighten the belts.  There is no cambelt to change, though.
Last edit: 06 Nov 2024 08:00 by Rogerzilla.

Please Log in or Create an account to join the conversation.

Time to create page: 0.151 seconds
Joomla template by a4joomla