A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
16" rims -- who sells them?
27 Sep 2024 10:23 #257701
by 300bhpton
16" rims -- who sells them? was created by 300bhpton
..... steels and not super wide. So far I can only see 7 and 8 inch wide rims. Does anyone sell any 5 to 6 inch wide 16 rims for a Jimny? There are a few alloys this size, but the price gets high.... hence looking for a steel rim instead. Thanks.
Please Log in or Create an account to join the conversation.
27 Sep 2024 12:12 #257704
by 300bhpton
Replied by 300bhpton on topic 16" rims -- who sells them?
Interesting. Does the Kei version have 16's instead of 15's then?
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
27 Sep 2024 16:02 #257712
by jackonlyjack
Replied by jackonlyjack on topic 16" rims -- who sells them?
I looked for skinny 16's like you said price is steep
These where from ebay 6.5" x16 et 0
These where from ebay 6.5" x16 et 0
Please Log in or Create an account to join the conversation.
Time to create page: 0.140 seconds