A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

gear box

More
13 May 2024 11:36 #255938 by paul2u
gear box was created by paul2u
i am now on the hunt for a good gear box for my new to me 2008 jimny  apart from 2008  what other years are the very same box to give me a bit of buying scope  thankyou

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
13 May 2024 17:21 #255944 by Lambert
Replied by Lambert on topic gear box
As far as I am aware all boxes from 05 to 18 are compatible and from 09 on they've got sealed bearings which saves a potential rebuild.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: paul2u

Please Log in or Create an account to join the conversation.

More
13 May 2024 17:57 #255946 by paul2u
Replied by paul2u on topic gear box
thanx Lambert just what i was looking for this gives me a bit of scope cheers

Please Log in or Create an account to join the conversation.

More
14 May 2024 09:15 - 14 May 2024 09:18 #255954 by yakuza
Replied by yakuza on topic gear box
 

Totally awful pictrue from my cheap chinesium endoscope thru the oil filling plug of my 2013 gearbox when i bught it.
But it shows the green closed bearing.

So if in doubt it should be possible to check if your used gearbox has the updated bearings with the closed sides. 
Color may vary of course.

My 2005 gearbox failed in 2018 after one year of exposing it to the hundred horses of the m16 engine.
Now i have driven the car with the newer box for five years and must be approx 60000km or more.

pics of broken open bearings here:
www.bigjimny.com/index.php/forum/8-my-ji...kuza?start=36#191450
 

Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Last edit: 14 May 2024 09:18 by yakuza.

Please Log in or Create an account to join the conversation.

More
14 May 2024 19:50 #255956 by paul2u
Replied by paul2u on topic gear box
i have found out what happened to mine somebody before me has changed the oil seal but looks like they went in with a screw driver or something like it and damaged the seal housing so i have yet to solve this problem its not to bad but sure it will get an advisory , i am looking at another box now 2010

Please Log in or Create an account to join the conversation.

More
15 May 2024 15:41 #255963 by yakuza
Replied by yakuza on topic gear box
Bitumen underseal or something greasy can be put over the damage when you insert the new shaft seal. Or Even tec7 or sika. Easy fix.
If there is bearing noise from the box then swap it before it breaks down.

Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
The following user(s) said Thank You: paul2u

Please Log in or Create an account to join the conversation.

Time to create page: 0.169 seconds
Joomla template by a4joomla