A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

new to me

More
21 Apr 2024 05:54 #255708 by paul2u
new to me was created by paul2u
ok so i managed to find a new to me jimny, unlike my old one this one has a 2 inch lift  which i am not fussed about but i can live with, the only question about this is how do i know what spring  shocker to buy should i break one , and should i decide to go back to standard is it just a case of shockers and springs i have had a good look at it and this is all i can see it needs doing cheers

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
21 Apr 2024 06:24 #255709 by Lambert
Replied by Lambert on topic new to me
If it's just a simple lift with no evidence of coloured bushes in the radius arms then yes a set of springs and dampers will put it back. As for replacing existing you might be lucky and still have markings on the dampers that could point you in the direction of what was used but if its been on a while that gets increasingly less likely.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: paul2u

Please Log in or Create an account to join the conversation.

Time to create page: 0.151 seconds
Joomla template by a4joomla