A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Bodywork advice

More
08 Mar 2024 17:17 #254926 by Quasi
Bodywork advice was created by Quasi
After a bit of advice folks . Jimny's had a bit of a bash and is now a Cat S write off. Insurance have offered me £10500, or buy it back for £2500 and pocket £8000. It's a 15 plate with 53K miles, and was in good condition last week. The o/s front wing, bumper and door are easy repairs, but the B pillar is creased and the rear 1/4 is pushed in below the filler flap.I reckon it would need a replacement welding in, which is beyond my welding skills to do, so I'd need to pay someone to do that.

Do you reckon it's worth doing, or should I just take the money and run? I'm not too bothered about resale value afterwards as I tend to keep cars till they are worthless anyway.

Cheers
Mark
Attachments:

Please Log in or Create an account to join the conversation.

More
08 Mar 2024 18:16 #254931 by jlines
Replied by jlines on topic Bodywork advice
I think I would take the money and run. There are a couple of 15 plates with lower miles on auto trader at near 11k so with a bit of haggling you would probably be near to what the insurance company are offering you.

Please Log in or Create an account to join the conversation.

More
08 Mar 2024 19:40 #254934 by jackonlyjack
Replied by jackonlyjack on topic Bodywork advice
I reckon that B pillar would pull out 
Wing and bumper second hand from kap suzuki 

Please Log in or Create an account to join the conversation.

Time to create page: 0.123 seconds
Joomla template by a4joomla