A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

coil spring

More
08 Mar 2024 08:49 #254899 by paul2u
coil spring was created by paul2u
i need to replace my broken n/s rear coil spring can this be done by just letting the axel hang   and using spring compressor cheers

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
08 Mar 2024 12:39 #254911 by Lambert
Replied by Lambert on topic coil spring
Yeah easy enough just be careful with the spring compressor.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: paul2u

Please Log in or Create an account to join the conversation.

More
08 Mar 2024 19:45 #254935 by jackonlyjack
Replied by jackonlyjack on topic coil spring
If you take one end of panhard rod off
You will not need spring clamps 
Just keep an eye on your brake line from chassis to axle or un clip it 
You will need a ratchet strap to pull body back in line to re attach panhard 

Please Log in or Create an account to join the conversation.

Time to create page: 0.151 seconds
Joomla template by a4joomla