A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Panhard rod dimensions

More
16 Sep 2023 23:58 #250844 by Skaguy
Gen 3 Jimny 1.3 in BC Canada. I broke my rear panhard rod today. My buddy want to use the end bushing parts and put in a new thicker rod. He’s asking what is the specification for centre to centre rod length.
Many thanks in advance

Please Log in or Create an account to join the conversation.

More
18 Sep 2023 12:13 #250866 by LesNewell
Replied by LesNewell on topic Panhard rod dimensions
When I made mine I just measured the distance. Remove the bent bar. With the Jimny at normal ride height make sure the distance from the wheel to the chassis is the same on both sides. You can now simply measure the hole spacing. A couple of millimeters either way isn't going to make any difference.

Please Log in or Create an account to join the conversation.

Time to create page: 0.128 seconds
Joomla template by a4joomla