A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Lift kit size ?
02 Aug 2023 10:12 #250083
by Obarno
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15
Lift kit size ? was created by Obarno
Ive got a 2007 Jimny that I’ve had for about 12 years. When I bought it it already had a suspension lift on it together with extended brake hoses, adjustable panards and caster correction front arms.
one of the rear springs has broken and it makes sense to replace all the springs and shocks too. The question is what size springs do I buy! The measurement between the centre of the wheel and the edge of the wheel arch is 21.5 inches on the near side and 22 on the off side. It’s the near side rear spring that is broken hence the difference in heights. The car has a 2 inch body lift and the tyres are 30 9.50 15.
Could someone tell me what the height is between the centre of the wheel and the same part of the wheel arch (which has been cut as you can see) on a standard car so that I can decide what to buy?!
When I bought the car I made a note that it was a 2.5 inch lift but not sure how true that is. On the rear I replaced the shocks a few years ago and they are plus 2 inch but with the swivel rear lower mount so probably about 3 inches! Confused or what!
one of the rear springs has broken and it makes sense to replace all the springs and shocks too. The question is what size springs do I buy! The measurement between the centre of the wheel and the edge of the wheel arch is 21.5 inches on the near side and 22 on the off side. It’s the near side rear spring that is broken hence the difference in heights. The car has a 2 inch body lift and the tyres are 30 9.50 15.
Could someone tell me what the height is between the centre of the wheel and the same part of the wheel arch (which has been cut as you can see) on a standard car so that I can decide what to buy?!
When I bought the car I made a note that it was a 2.5 inch lift but not sure how true that is. On the rear I replaced the shocks a few years ago and they are plus 2 inch but with the swivel rear lower mount so probably about 3 inches! Confused or what!
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Time to create page: 0.239 seconds