A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Exhaust Manifold Bolt Replacement
07 Jun 2023 18:20 #249454
by facade
I'd have expected 10x1.25, the Japanese always use fine threads into alloy. They tend to use reduced head sizes too, so you need those spanners that are always missing from the short sets (11mm, 15mm, 16mm & 18mm)
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Exhaust Manifold Bolt Replacement
Crikey, UNF threads on a Japanese car!The bolt size was "7/16-20 UNF" for anyone looking in future
I'd have expected 10x1.25, the Japanese always use fine threads into alloy. They tend to use reduced head sizes too, so you need those spanners that are always missing from the short sets (11mm, 15mm, 16mm & 18mm)
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.119 seconds