A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

JImny ECU and transfere case.

More
08 May 2022 21:28 #243269 by 8ollins
JImny ECU and transfere case. was created by 8ollins
Just a quick question with no reason behind it. But is the push-button transfer case controlled by the ECU or is it a completely separate system?

Please Log in or Create an account to join the conversation.

More
09 May 2022 02:27 #243271 by zukebob
Replied by zukebob on topic JImny ECU and transfere case.
Initially there were two control modules for the transfer. The 4WD Controller and the Transfer Controller. In later year models, the functionality of both was built into a single Control Module.
I started out with nothing & still have most of it left
The following user(s) said Thank You: 8ollins

Please Log in or Create an account to join the conversation.

More
12 May 2022 09:23 #243300 by zebooka
Replied by zebooka on topic JImny ECU and transfere case.
Completely separate system.
As zukebob said - there are two variants.
2004(JDM)/2005(world) - 2008
and 2008-2018 (JB23W-600001+, JB43W-400001+, JSAFJB43V00400001+, JSAFJB53V00400001+)
JB43V M18A R7ME 0.795, 1.32/4.67 (0-77 trail gear), 4.09, MT 215/85/16 + S❄ 235/75/15, 4"
The following user(s) said Thank You: 8ollins

Please Log in or Create an account to join the conversation.

Time to create page: 0.110 seconds
Joomla template by a4joomla