A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Fuse FI (EPI system) keeps blowing

More
08 May 2022 07:48 #243259 by ipresler
Hi, friends
After the 4WD lights problem gone, I have a next strange thing
FI fuse (no. 10, 15A, EPI system) has blown three times within two days
How can I diagnose the problem? 

Thanks!

Please Log in or Create an account to join the conversation.

More
08 May 2022 15:36 #243264 by fordem
This is going to be a tough one - the FI fuse feeds quite a bit of stuff, and a short anywhere in there can take it out, added to that your problem is intermittent which makes it an order of magnitude more challenging.

Build your self a "fuse adapter" that replaces the fuse with low wattage 12V bulb - you're going to insert this into the fuse slot to avoid having to buy a ton of fuses - you won't be able to run the engine with it in, but, you insert it and then you're going to push/pull/flex move the fuel injection wiring whilst watching the lamp - if the movement of the wiring causes a short circuit to occur, the lamp lights instead of a fuse blowing.

Injector wiring, EGR wiring, MAF, fuel pump, anything fuel injection or emission control related - eyeball them all look for damaged wiring, chafing where it's secured , that sort of stuff.

Good luck...

Please Log in or Create an account to join the conversation.

Time to create page: 0.199 seconds
Joomla template by a4joomla