BigJimny Store
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

Shift Lever short for the 3" body lift.

  • RhinoJim
  • Topic Author
  • Visitor
  • Visitor
    Public
09 Jul 2014 15:56 #119576 by RhinoJim
Shift Lever short for the 3" body lift. was created by RhinoJim
Can some one help me! I am fitting a 3" body lift on my 2003 Suzuki Jimny, my shift lever is too short...can someone advise me what I can buy or do to solve this problem?



Thanks!! ;) ;)
Attachments:

Please Log in or Create an account to join the conversation.

  • TomDK
  • Visitor
  • Visitor
    Public
09 Jul 2014 16:37 #119579 by TomDK
Replied by TomDK on topic Shift Lever short for the 3" body lift.
Easy.
Pointless with such a massive bodylift. Go with no or only 1" bodylift.

Please Log in or Create an account to join the conversation.

  • Bits4Vits
  • Visitor
  • Visitor
    Public
09 Jul 2014 16:58 #119580 by Bits4Vits
Replied by Bits4Vits on topic Shift Lever short for the 3" body lift.
I'm not aware of a bolt-on solution to extend the shfter(s)... easiest way is to cut it and weld in a suitable sized piece of bar, and you may have to bend it a bit as well to account for the new position of the transmission tunnel...

Please Log in or Create an account to join the conversation.

  • idiotmobil
  • Visitor
  • Visitor
    Public
09 Jul 2014 20:12 #119619 by idiotmobil
Replied by idiotmobil on topic Shift Lever short for the 3" body lift.
he fitting different axles and 31s so some reason that means he needs a massive lift when a 3" suspension lift will do and he will have the added benefit if he sets up right on the new axle to have plenty of room, I bet hes one of these ones that thinks a massive lift is cool and can show if off down the pub then wonders y its on its roof at a pay and play day lol

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
09 Jul 2014 20:39 #119624 by supergaz
Replied by supergaz on topic Shift Lever short for the 3" body lift.
Id remove my bodylift if it wasn't for my 6 point external rollcage. I lowered my suspension from 4.5" to 3" as it was stupid high on 31" tyres. I think just a 3" lift is perfect.

Please Log in or Create an account to join the conversation.

  • idiotmobil
  • Visitor
  • Visitor
    Public
09 Jul 2014 20:44 #119625 by idiotmobil
Replied by idiotmobil on topic Shift Lever short for the 3" body lift.

supergaz wrote: Id remove my bodylift if it wasn't for my 6 point external rollcage. I lowered my suspension from 4.5" to 3" as it was stupid high on 31" tyres. I think just a 3" lift is perfect.


mine were 29.5 when new and theres plenty of room for bigger at very most I would do a 1" lift if really needed after the tyres went on but a hammer to the arches would be first thing done before

Please Log in or Create an account to join the conversation.

Time to create page: 0.159 seconds
Joomla template by a4joomla