A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Fitting a Fuel Pump Suppressor

More
01 Aug 2010 11:55 #4008 by Obarno
Hope you don't mind but this is really a question on fitting it to a tbi Samurai, but maybe it applies equally to a Jimny.

Do you think the suppressor will work as well if it is fitted on the wire at the fuel pump relay rather than if it were fitted closer to the fuel pump? It's just that its much easier to find/identify the wire at the relay!
Any thoughts appreciated

Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15

Please Log in or Create an account to join the conversation.

Time to create page: 0.120 seconds
Joomla template by a4joomla