A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

What size and type of wheels?

  • Coletti
  • Topic Author
  • Visitor
  • Visitor
    Public
19 Mar 2012 20:04 #35963 by Coletti
What size and type of wheels? was created by Coletti
As above, looking at getting some new wheels and tyres soon but don't really know what to get, wanted to run a 235-245 wide tyre and was considering 15" rims also would like it a bit wider than it is but without wheel spacers so what off set would be good. Id love a set of mach5's but I can't justify spending that much on something that's going to take a battering so wondered what people on here are running/would suggest to use? A couple of pics would be nice too ;). Any information will be greatly appreciated

Thanks

George

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
19 Mar 2012 20:10 #35968 by supergaz
Replied by supergaz on topic Re: What size and type of wheels?
Try some Daihatsu rims, good offset 7j

Attachment show1.jpg not found



that's on 235/75/15's but also has 32mm spacers.
Attachments:

Please Log in or Create an account to join the conversation.

  • Coletti
  • Topic Author
  • Visitor
  • Visitor
    Public
19 Mar 2012 20:12 #35972 by Coletti
Replied by Coletti on topic Re: What size and type of wheels?
They look really good, hadn't thought about the daihatsu rims but will def be looking at them now

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
19 Mar 2012 20:16 #35974 by supergaz
Replied by supergaz on topic Re: What size and type of wheels?
I'm going to be re-spraying mine silver in a few weeks, and also going to spray the inside bits satin black. Will take some time but should look good.
I bet they can be picked up pretty cheap from a scrap sportrac.

Please Log in or Create an account to join the conversation.

  • Coletti
  • Topic Author
  • Visitor
  • Visitor
    Public
19 Mar 2012 20:29 #35982 by Coletti
Replied by Coletti on topic Re: What size and type of wheels?
It will take some time but it will be well worth it I reckon, they will look really smart once you've done

Please Log in or Create an account to join the conversation.

Time to create page: 0.135 seconds
Joomla template by a4joomla