A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

special tool for hub nut removal

  • ray walker
  • Topic Author
  • Visitor
  • Visitor
    Public
14 Feb 2012 18:47 #33461 by ray walker
special tool for hub nut removal was created by ray walker
Hello, i have to replace the front wheel bearings on my recently purchased Jimny. it seems the special tool is out of stock at the moment. I wonder if any Jimny owner, who has the tool, and is close to Chesterfield in North Derbyshire, would hire me the tool? Just a thought!!

Please Log in or Create an account to join the conversation.

  • bluejimny
  • Visitor
  • Visitor
    Public
14 Feb 2012 19:33 #33468 by bluejimny
Replied by bluejimny on topic Re: special tool for hub nut removal
i do have a few if you get stuck

Ringlock

Please Log in or Create an account to join the conversation.

More
14 Feb 2012 21:06 #33485 by X8GGY
I have them (cheaper*) too -

www.bits4vits.co.uk/store/jimny/bearing-...-jimny/prod_236.html

*Almost, but not quite, as cheap as Martin :whistle:

Dave
The following user(s) said Thank You: ray walker

Please Log in or Create an account to join the conversation.

  • darthloachie
  • Visitor
  • Visitor
    Public
15 Feb 2012 08:42 #33503 by darthloachie
Replied by darthloachie on topic Re: special tool for hub nut removal
fight fight :laugh:

Please Log in or Create an account to join the conversation.

  • bluejimny
  • Visitor
  • Visitor
    Public
15 Feb 2012 08:52 #33506 by bluejimny
Replied by bluejimny on topic Re: special tool for hub nut removal
:P :P

Please Log in or Create an account to join the conversation.

More
15 Feb 2012 09:09 #33507 by mlines
And I just found one that was not listed, so its "back in stock"

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: ray walker

Please Log in or Create an account to join the conversation.

More
15 Feb 2012 11:59 #33515 by X8GGY

darthloachie wrote: fight fight :laugh:


No, friendly banter, after a few Stellas :blush:

bluejimny wrote: :P :P


But looks like Rus took it as just that...

My apologies, shouldn't have posted a linky-ad. :blush: :whistle:

I blame the beer...

Please Log in or Create an account to join the conversation.

  • darthloachie
  • Visitor
  • Visitor
    Public
15 Feb 2012 12:18 #33523 by darthloachie
Replied by darthloachie on topic Re: special tool for hub nut removal

Jimny-Dave wrote: My apologies, shouldn't have posted a linky-ad. :blush: :whistle:

I blame the beer...


Its just my weird sense of humour :side: :silly:

Please Log in or Create an account to join the conversation.

  • ray walker
  • Topic Author
  • Visitor
  • Visitor
    Public
15 Feb 2012 16:16 #33540 by ray walker
Replied by ray walker on topic Re: special tool for hub nut removal
thanks all, however Martin has located a tool which i have ordered, sooooo, down to me to do the work, i will report back with how difficult i found the job.

Please Log in or Create an account to join the conversation.

  • bluejimny
  • Visitor
  • Visitor
    Public
15 Feb 2012 20:56 #33568 by bluejimny
Replied by bluejimny on topic Re: special tool for hub nut removal
oh no its all friendly on here B) me and Dave have the curse of the VAT man damm him!!

Please Log in or Create an account to join the conversation.

  • Keefe
  • Visitor
  • Visitor
    Public
17 Feb 2012 16:38 #33642 by Keefe
Replied by Keefe on topic Re: special tool for hub nut removal
No eBay APP ID and/or Cert ID defined in Kunena configurationAnybody else want one?

Please Log in or Create an account to join the conversation.

More
17 Feb 2012 16:49 #33643 by Halford
:( yes I was at £20 and have been outbid

Please Log in or Create an account to join the conversation.

Time to create page: 0.181 seconds
Joomla template by a4joomla