Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Rear storage options
- Bigchridy
- Topic Author
- Visitor
-
Public
Both the rear seats have been removed so there is room for a van vault etc. Basically I want something that can be bolted in so it wont get thrown around when off road. And as cheap as poss!!
Chris
Please Log in or Create an account to join the conversation.
- wanderinstar
- Visitor
-
Public
www.bigjimny.com/index.php?option=com_ku...6&id=33596&Itemid=75
Please Log in or Create an account to join the conversation.
I was wondering about those, namely how you would get the liner in with them sticking out :huh:there are 2 holes in the middle of the side to bolt it in using the protruding studs from rear seat fitment
have you fitted it yet, looking forward to pics
Please Log in or Create an account to join the conversation.
- wanderinstar
- Visitor
-
Public
Will put some photos up when fitted.
Please Log in or Create an account to join the conversation.
- Bigchridy
- Topic Author
- Visitor
-
Public
wanderinstar wrote: How about one of these. It fits flat to the floor and there are 2 holes in the middle of the side to bolt it in using the protruding studs from rear seat fitment.
www.bigjimny.com/index.php?option=com_ku...6&id=33596&Itemid=75
That looks good. Cant wait to see some pictures of it fitted.
Does it have a lid or is it open?
I'm after something with a lid so people cant see in and to stop stuff falling out if.......when I tip the Jimny over!:laugh:
Chris
Please Log in or Create an account to join the conversation.
- bari
- Visitor
-
Public
www.flickr.com/photos/65781977@N03/5988257719/
hope this helps
Please Log in or Create an account to join the conversation.
- wanderinstar
- Visitor
-
Public
Bigchridy wrote:
wanderinstar wrote: How about one of these. It fits flat to the floor and there are 2 holes in the middle of the side to bolt it in using the protruding studs from rear seat fitment.
www.bigjimny.com/index.php?option=com_ku...6&id=33596&Itemid=75
That looks good. Cant wait to see some pictures of it fitted.
Does it have a lid or is it open?
I'm after something with a lid so people cant see in and to stop stuff falling out if.......when I tip the Jimny over!:laugh:
Chris
I intend putting a bed base over the top, like this.
auszookers.com/forum/viewtopic.php?f=14&...ouble+Bed+in+A+Jimny
Please Log in or Create an account to join the conversation.