A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

HOW DO I REMOVE PLASTIC SIDE TRIMS / ARCHES

  • myers647
  • Topic Author
  • Visitor
  • Visitor
    Public
28 Nov 2011 20:38 #26827 by myers647
HOW DO I REMOVE PLASTIC SIDE TRIMS / ARCHES was created by myers647
Hi this might be a stupid question but how do i remove the plastic arches without breaking the plastic clips that hold them on?
I need to trim my arches with these new tyres on any tips.

Thanks

James
:whistle: :whistle: :whistle:

Please Log in or Create an account to join the conversation.

  • X-Eng Simon
  • Visitor
  • Visitor
    Public
28 Nov 2011 21:18 #26839 by X-Eng Simon
Replied by X-Eng Simon on topic Re: HOW DO I REMOVE PLASTIC SIDE TRIMS / ARCHES
The plastic arches have circular plastic fasteners with a narrow slot near the centre. Stick a screwdriver in the slot and lever the centre out - which releases them.

This will give access to the back of the side trims. These are held on with plastic spring clips which are snapped into a square hole. Squeeze the back of the clip - and it will release.

Si

Please Log in or Create an account to join the conversation.

Time to create page: 0.133 seconds
Joomla template by a4joomla