A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

selecting 4wd

  • russell
  • Topic Author
  • Visitor
  • Visitor
    Public
15 Oct 2011 18:49 #23721 by russell
selecting 4wd was created by russell
when i select 4wd in my jimny the 4x4 light flashes, it says on the sun visiour that if it flashes stop and re select 4wd? why is this and what can i do to solve it if it is a fault?

Please Log in or Create an account to join the conversation.

  • martysmith
  • Visitor
  • Visitor
    Public
15 Oct 2011 18:52 - 15 Oct 2011 18:52 #23722 by martysmith
Replied by martysmith on topic Re: selecting 4wd
mine done the same and all i had to do was repair the vacume pipe that comes of inlet manifold (it may just have come off)
Last edit: 15 Oct 2011 18:52 by martysmith. Reason: s

Please Log in or Create an account to join the conversation.

  • russell
  • Topic Author
  • Visitor
  • Visitor
    Public
15 Oct 2011 18:57 #23724 by russell
Replied by russell on topic Re: selecting 4wd
ok cool ill check that out so im geuseing it all runs of a vacum?

Please Log in or Create an account to join the conversation.

  • martysmith
  • Visitor
  • Visitor
    Public
15 Oct 2011 19:08 #23726 by martysmith
Replied by martysmith on topic Re: selecting 4wd
yea mate the hubs lock on a vacume ......i used my first one for ages with it flashing and never new anything was wrong then i bought wor lass one and her light stayed on and i could hear hubs clicking in !so after looking on this site i found problem and had it fixed in mins :P

Please Log in or Create an account to join the conversation.

  • russell
  • Topic Author
  • Visitor
  • Visitor
    Public
15 Oct 2011 19:25 #23728 by russell
Replied by russell on topic Re: selecting 4wd
thamks for the help iv just been down to the workshop and it was exzactly that the pipe joiner was split iv put a new one in and the hubs click in :cheer: im very surprised its handeled the mud so well in 2wd lol but thamks agin its very much apreciated

Please Log in or Create an account to join the conversation.

  • martysmith
  • Visitor
  • Visitor
    Public
15 Oct 2011 19:30 #23730 by martysmith
Replied by martysmith on topic Re: selecting 4wd
your welcome mate

Please Log in or Create an account to join the conversation.

Time to create page: 0.263 seconds
Joomla template by a4joomla