A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
After some time spent tying to get this jimny running swopping over all the sensors the only sensor that I don't have a spare of is a crank sensor and it seems the only place I can get one is from Suzuki at £73.00 d:-( is there any where on the net I can get one from at a lot less money can't find one on eBay or my parts place as my jimny will run for a min or two then cut out my obd code reader finds no foult codes
I have been chasing up sensors to stock on BigJimny. I have been in conversations with the Distributor who prematurely announced their arrival in May/June. The last statement from the manufacturer is that it will be the end of August. The excuse is that the Tsunami in Japan is creating a severe shortage of this type of component.
It will be no consolation to you to know that the sensors will range from £30 to £45 depending on the model/age of Jimny you have.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
I should also state that generic (three wire and four wire) sensors are around and are available but as you have to plumb these into the wiring and, to some extent, guess on the sensor characteristics required, I have not stocked these as most BigJimny customers want a simple straight plug-in solution.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
logo.
