A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

My winch

  • suzuki_ed
  • Topic Author
  • Visitor
  • Visitor
    Public
01 May 2011 14:26 #15704 by suzuki_ed
My winch was created by suzuki_ed
i picked this up today its a goldfish on a bow 2 with a large challenge drum

Attachment 222353_10150169765052267_599222266_7396555_5135274_n.jpg not found



sadly because the drum isnt standard it doesnt fit so I'm going to need to modify the bumper a bit

Attachment 227761_10150169761862267_599222266_7396529_4445121_n.jpg not found

Attachments:

Please Log in or Create an account to join the conversation.

  • toph
  • Visitor
  • Visitor
    Public
01 May 2011 15:42 - 01 May 2011 15:45 #15705 by toph
Replied by toph on topic Re: My winch
same winch as mine, if you are struggling for room just replace the motor with a standard one..............




edit


just looked at the pictures and read properly its the drum thats catching and not the overall width of the whole winch.
Last edit: 01 May 2011 15:45 by toph. Reason: dont read things proper!

Please Log in or Create an account to join the conversation.

  • suzuki_ed
  • Topic Author
  • Visitor
  • Visitor
    Public
01 May 2011 16:36 #15710 by suzuki_ed
Replied by suzuki_ed on topic Re: My winch
My plan is to cut those bars off and weld them back on further forward and width ways it could be close but so i might need to do a bit more cutting and welding

Please Log in or Create an account to join the conversation.

Time to create page: 0.118 seconds
Joomla template by a4joomla