A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
panhards, again....
- biggaz
- Topic Author
- Visitor
-
Public
- darthloachie
- Visitor
-
Public
- g187eev
- Visitor
-
Public
03 Feb 2011 20:06 - 03 Feb 2011 20:06 #10895
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re: panhards, again....
Rob,
Whilst on the subject of Panhard Rods, I have just re-centred my axle only to discover that the disk caliper fouls the panhard rod mount (This IS the rear, I have rear disks). The trailing arms you are making me, do they adjust the position of the axle ( I have a 3" lift if you recall) and if so in what direction?. I can adjust it out at present using the adjustment in the rod but its not ideal and if the axle moves further back then the problem will worsen.
Martin
Whilst on the subject of Panhard Rods, I have just re-centred my axle only to discover that the disk caliper fouls the panhard rod mount (This IS the rear, I have rear disks). The trailing arms you are making me, do they adjust the position of the axle ( I have a 3" lift if you recall) and if so in what direction?. I can adjust it out at present using the adjustment in the rod but its not ideal and if the axle moves further back then the problem will worsen.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 03 Feb 2011 20:06 by mlines.
Please Log in or Create an account to join the conversation.
Time to create page: 0.134 seconds