BigJimny Store
Sell your bits!
NOTE: This is for members and their private sales/wants.
There are rules that suppliers have to follow (and many of you do follow the rules). However there have been a number of instances recently where "suppliers" have broken the rules.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum

WANTED - Wheel nuts or tool

More
10 Sep 2019 17:42 #213377 by Max Headroom
WANTED - Wheel nuts or tool was created by Max Headroom
Nightmare.... HELP!

I've lost the cursed tool for the locking wheel nuts.
I can't determine if this is a genuine Suzuki locking-nut or an aftermarket one - perhaps someone here can? (The outer part spins)

So, Im looking for a replacement tool OR four alloy wheel nuts (19mm) to replace those I'm about to destroy removing them.

Can anyone here help please?

IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS

Please Log in or Create an account to join the conversation.

More
10 Sep 2019 17:48 #213378 by Riccy
Replied by Riccy on topic WANTED - Wheel nuts or tool
Do you have a picture of it?
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

More
10 Sep 2019 18:24 #213382 by Max Headroom
Replied by Max Headroom on topic WANTED - Wheel nuts or tool
WHOOPS! I meant to add photos to my initial post.:blush:

Here you go...

The nut type, and the offending locking nut



The locking nut pattern...


IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS

Please Log in or Create an account to join the conversation.

More
10 Sep 2019 18:51 #213386 by Riccy
Replied by Riccy on topic WANTED - Wheel nuts or tool
looks like a genuine suzuki one from this ebay link (if it works)...

www.ebay.co.uk/i/183450919892?chn=ps&nor...aEAQYDyABEgJy7_D_BwE
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
10 Sep 2019 19:07 #213387 by Lambert
Replied by Lambert on topic WANTED - Wheel nuts or tool
How I would get that off. Find a socket that just fits over it. With a drill bit that fits inside the drive square nicely so 12mm for half inch or 9.5mm for 3/8 use the socket as a guide to put a decent sized dimple in the centre of the lock nut. Now you have two options. Either drill a hole sufficient to use a large screw extractor if you have some. Alternatively drill and tap a thread into the end then use a suitable nut and bolt to lock the bolt to the wheel nut and undo. Both require patience and some slightly involved tools but both will get the locks off without ripping the wheels to bits with slipping drills or grinding.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
10 Sep 2019 19:07 #213388 by Max Headroom
Replied by Max Headroom on topic WANTED - Wheel nuts or tool
I looked at that Riccy, if you count the points on mine it has 7, that one has only 6

I also found this - darned pricey but even from this I couldnt see one that was exact...
various tool patterns



7048 looks like it would be the one BUT the outer parts are square, not round like mine :(

IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS

Please Log in or Create an account to join the conversation.

Time to create page: 0.134 seconds
Joomla template by a4joomla