The aim of the shop it to provide those bits and pieces that are perhaps hard to get or expensive to get. Everything is proied as low as possible to try and bring down the cost of owning a Jimny. If there is anything you think would be wanted by others then let me know.
This part of the forum is for your comments on the shop, good or bad. Let me know your thoughts, particularly if you have thought about buying something but then haven't for some reason.
If you have any ofther questions please ask them here.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Hi Martin, I think another thing that most people would like to see in the shop is 7mm spacer rings to fit SJ manual locking hubs so we can bin the air locking ones that dont work too well when swamped with mud !
This is something we are planning. I have never seen it done for real but I know a lot of people who have done it. Once I have clear details of what this ring needs to be then we will get one done pretty quick. Some call it a 5mm ring some call it a 7mm ring and I also what to know where it fits etc so I can get diameters/shape.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
I have a drawing from the guy who did 'Project Tinfoil', the New Zealand based jimny magazine project, not seen it for years but I'll dig my old laptop out and have a look for it over the weekend.
