Just a quick note to say that there is a "Partner Products" section in the shop now where a few selected items are available from partner suppliers. If you wish an item you make/supply to be included then let me know.
I have jsut had my hands on the first prototype adjustable/strengthened Panhard Rod - its looking good. Will shortly be looking for a willing victim to try out the first set (at a special discount price).
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Just to emphasise that the trial versions are actually the finished product, its just the first set. You would get them at near cost price with the caveat that:
1. I would require detailed, high resolution photos of the fitting process.
2. They may not work - we could get the design wrong! However we are pretty confident that we are ok.
3. You have to "part-ex" in your old Panhard Rods.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
To get my hands on your strenthen panhard rods will it be an exchange for my old ones so they will have to be straight. As I notice mine has a bit of a curve in them I guess I will have to get a straight one first.
Yes, we are really planning on it being an exchange so yours have to be re-usable.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
I have my two old Panhards in the garage - you can have these if you want ... I have Rob Storr Panhards, so just dont need them anymore - You're welcome to them!
Let me know what you want for them and remember to include the postage and I will PayPal you.
I think if you post them via the "slowest" method its about £7
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
I have just had the price of the finished items sent through and will sort out some maths and let you know the price.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
They are here, just need to get them tested, I think Baz seems to have volunteered?
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
