BigJimny Store
Discuss the BigJimny Shop and Website in this section. Whats good, whats bad, whats ugly! - what would you like to see!

UJ's

More
07 Jul 2011 07:23 #18676 by Obarno
UJ's was created by Obarno
Hi Martin
Just wondered if you were considering stocking uj's as they seem to wear out quite quickly, particularly if you have a rocklobster and bigger tyres = more torque through the system?
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15

Please Log in or Create an account to join the conversation.

More
07 Jul 2011 07:50 #18677 by mlines
Replied by mlines on topic Re: UJ's
I can do all parts such as these quite easily. They are just not in the shop until the first person needs them.

For standard Jimnys its straight forward, let me know your Reg No.

For non-standard ones its more difficult to identify the correct joint as SJ's had a few varients over the years, but it can be done.

Martin
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
08 Jul 2011 12:54 #18741 by Obarno
Replied by Obarno on topic Re: UJ's
Its for the rear prop on my rocklobster conversion so not std Jimny, but I think its a Jap SJ front prop with 25mm joints. I think these are the same as std Jap Jimny.
Can you ship to France?
Thanks
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15

Please Log in or Create an account to join the conversation.

More
19 Jul 2011 07:27 #19171 by mlines
Replied by mlines on topic Re: UJ's
www.bigjimny.com/index.php?option=com_ku...0&id=18676&Itemid=75
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
19 Jul 2011 07:44 #19172 by Obarno
Replied by Obarno on topic Re: UJ's
Thanks Martin - just ordered one.
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15

Please Log in or Create an account to join the conversation.

Time to create page: 0.146 seconds
Joomla template by a4joomla