×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Rear Panhard
Less
More
- Posts: 3
- Thank you received: 0
- Points: 0.00
23 Jan 2018 11:57 #188754
by Bilmin
Rear Panhard was created by Bilmin
Hello all
After damaging the rear chassis Panhard bracket on my 06 Jinny I welded up a replacement but had to move the hole slightly to the passenger side so this pushes my rear axle to the left about an inch or less so my question is
Is there a rear adjustable Panhard that can be adjusted slightly shorter than normal??
Thanks all
Bill
After damaging the rear chassis Panhard bracket on my 06 Jinny I welded up a replacement but had to move the hole slightly to the passenger side so this pushes my rear axle to the left about an inch or less so my question is
Is there a rear adjustable Panhard that can be adjusted slightly shorter than normal??
Thanks all
Bill
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8814
- Thank you received: 1761
- Points: 36277.00
23 Jan 2018 12:38 #188757
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Rear Panhard
Not as far as I am aware. They are primarily for lifts which need longer not shorter. Unless someone knows different?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: Bilmin
Please Log in or Create an account to join the conversation.
- Mraz
- Visitor
-
Public
23 Jan 2018 18:22 #188777
by Mraz
Replied by Mraz on topic Rear Panhard
If you can weld, and it seems so... just shorten the original panhard and weld it back together. Or make it adjustable.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 3
- Thank you received: 0
- Points: 0.00
05 Feb 2018 06:31 #189102
by Bilmin
Replied by Bilmin on topic Rear Panhard
I saw this rear Panhard on eBay
Panhard
Will it fit Jimny as there is a small bend at one end and the brackets on axle and chassis on jimny are on same plane.
Is this for a jimny or is there something I don’t know?
Thankyou
Bill
Will it fit Jimny as there is a small bend at one end and the brackets on axle and chassis on jimny are on same plane.
Is this for a jimny or is there something I don’t know?
Thankyou
Bill
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8814
- Thank you received: 1761
- Points: 36277.00
05 Feb 2018 07:23 #189103
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Rear Panhard
The one in the listing looks wrong but the one in the description looks right. I would be looking for clarity from the seller.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: Bilmin
Please Log in or Create an account to join the conversation.
Time to create page: 0.119 seconds