A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
gear oil leaking again. grrrr!
- g4vcn
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
05 Feb 2011 14:01 #11006
by g4vcn
gear oil leaking again. grrrr! was created by g4vcn
As you know i had oil lealing from where prop goes indo gearbox. A few weeks back now i replaced the oil seal and now it is leaking again. Is it possible for oil to leak through the u joint as i have a new seal in the box and the u joint has oil all over it. the collar type part on the shaft seems to be dry.
any help please.
gav
any help please.
gav
Please Log in or Create an account to join the conversation.
- vitara_mad
- New Member
-
Public
Less
More
- Thank you received: 0
05 Feb 2011 15:51 #11014
by vitara_mad
Replied by vitara_mad on topic Re: gear oil leaking again. grrrr!
is there any play in the bearing on the output shaft ???
Please Log in or Create an account to join the conversation.
- g4vcn
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
05 Feb 2011 19:24 #11044
by g4vcn
Replied by g4vcn on topic Re: gear oil leaking again. grrrr!
what part is the output bearing?
gav
gav
Please Log in or Create an account to join the conversation.
- biggaz
- New Member
-
Public
Less
More
- Thank you received: 0
05 Feb 2011 19:58 #11051
by biggaz
Replied by biggaz on topic Re: gear oil leaking again. grrrr!
Isnt this the new jimny, id seriously be taking this back under warrenty! SOD the offroad/mods at least get them to pay some of it!
Please Log in or Create an account to join the conversation.
- g4vcn
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
05 Feb 2011 20:21 #11055
by g4vcn
Replied by g4vcn on topic Re: gear oil leaking again. grrrr!
yeh its the 09 plate. once i got the body lift off its back to standard. so i think ill just be going back to suzuki. its soon to be going up for sale but wont sell untill i know its a running how it should.
gav
gav
Please Log in or Create an account to join the conversation.
- cgauer
- New Member
-
Public
Less
More
- Thank you received: 0
05 May 2013 21:56 #70115
by cgauer
Replied by cgauer on topic gear oil leaking again. grrrr!
Same Issue! :blush:
I thought it was the rear gearbox seal.. But it wasn't. The collar was 100% clean and dry.
The culprit was the u-join itself. The end of it had a plate that seals the bottom part of the sliding spline (oil fed). Cleaned and filled it with high strength epoxy resin (the outer part of it).
30 min in-place job.
It is a 2009 VVT manual.
I thought it was the rear gearbox seal.. But it wasn't. The collar was 100% clean and dry.
The culprit was the u-join itself. The end of it had a plate that seals the bottom part of the sliding spline (oil fed). Cleaned and filled it with high strength epoxy resin (the outer part of it).
30 min in-place job.
It is a 2009 VVT manual.
Please Log in or Create an account to join the conversation.
Time to create page: 0.285 seconds