A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
jimny 33s what do i need??
- TonkaTough
- Topic Author
- New Member
-
Public
07 Mar 2013 02:30 #64824
by TonkaTough
jimny 33s what do i need?? was created by TonkaTough
im thinking about putting some 33s under my jimny i see 90% of the people on here run 33s what do i need to do i currently run 31s under mine with a 2" lift and a guard chop if i put a 2" body lift in mine would i run 33s properly? any help is nice 
Please Log in or Create an account to join the conversation.
- Dave cc
- New Member
-
Public
07 Mar 2013 07:42 #64827
by Dave cc
Replied by Dave cc on topic jimny 33s what do i need??
You will need a lot of lift and will end up cutting into the floor in the front to give clearance
That is why i moved my front axle foward by 3 inches to give more clearance
33s on a jim is not that staraight foward a job
That is why i moved my front axle foward by 3 inches to give more clearance
33s on a jim is not that staraight foward a job
Please Log in or Create an account to join the conversation.
- reaper
- New Member
-
Public
- Dave cc
- New Member
-
Public
- adamjimny
- New Member
-
Public
- reaper
- New Member
-
Public
Time to create page: 0.147 seconds