Front speaker upgrade (Jimny 3)

The content of any article might be expanded / improved in the future - revisit it sometimes.
Seen a mistake? Know something that isn't written? Edit and change this article yourself!
Some images in the article (if present) can be enlarged by clicking on them.

Introduction

Gen3 Jimnys are factory fitted a pair of cheap & plain 10 cm front speakers.

Those speakers can be replaced by much better sounding ones.

This guide contains instructions on how to remove the stock factory front speakers from a Jimny 3 and how to install better speakers in their place.

Tools needed

• Philips screwdriver;
• Small flat head screwdriver;
• Pliers;
• Wire cutter;
• Wire insulation stripper;
• For those who prefer fixed soldered wire connections:
  • Soldering iron;
  • Solder coil;
  • Soldering paste;
• For those who prefer detachable wire connections:
  • Suitable cable connectors;
  • Wire crimper;

Guide for Jimny 3

The front speakers in a Jimny 3 are located in the front foot wells (between the side doors and front wheels).

A nice Brazilian Jimny owner wrote a very good guide on upgrading front speakers in a Jimny 3.

Rest of this guide is to be written .....