Difference between revisions of "Front speaker upgrade (Jimny 3)"
m (Bosanek moved page Gen3 Front Speaker upgrade to Front speaker upgrade (Jimny 3) without leaving a redirect: Precise name) |
m (Minor cleanup) |
||
| Line 5: | Line 5: | ||
{{Gen3|}} | {{Gen3|}} | ||
| − | + | Jimnys 3 are factory fitted a pair of cheap & plain 10 cm front speakers. | |
Those speakers can be replaced by much better sounding ones. | Those speakers can be replaced by much better sounding ones. | ||
| Line 29: | Line 29: | ||
| − | == Guide | + | == Guide == |
{{Gen3|}} | {{Gen3|}} | ||
Latest revision as of 08:40, 9 August 2019
The content of any article might be expanded / improved in the future - revisit it sometimes.
Seen a mistake? Know something that isn't written? Edit and change this article yourself!
Some images in the article (if present) can be enlarged by clicking on them.
Introduction
Jimnys 3 are factory fitted a pair of cheap & plain 10 cm front speakers.
Those speakers can be replaced by much better sounding ones.
This guide contains instructions on how to remove the stock factory front speakers from a Jimny 3 and how to install better speakers in their place.
Tools needed
- Philips screwdriver;
- Small flat head screwdriver;
- Pliers;
- Wire cutter;
- Wire insulation stripper;
- For those who prefer fixed soldered wire connections:
- Soldering iron;
- Solder coil;
- Soldering paste;
- For those who prefer detachable wire connections:
- Suitable cable connectors;
- Wire crimper;
Guide
The front speakers in a Jimny 3 are located in the front foot wells (between the side doors and front wheels).
A nice Brazilian Jimny owner wrote a very good guide on upgrading front speakers in a Jimny 3.
Rest of this guide is to be written .....
