Difference between revisions of "Multimedia player upgrade or replacement"

From BigJimny Wiki
Jump to navigation Jump to search
(Improved the chapter on 1-DIN radio installation)
(Added a new link)
 
(15 intermediate revisions by the same user not shown)
Line 11: Line 11:
  
  
== Installing a 1-DIN multimedia player ==
+
== Center dash panel removal guide ==
 +
 
 +
 
 +
Whether replacing or upgrading the OEM multimedia player, you will need to remove the center dash panel first.
 +
 
 +
[[Media:Suzuki Jimny 3 - quick illustrated guide - dash center panel removal.pdf|'''Quick illustrated guide on how to remove the center dash panel''']]
 +
 
 +
''Someone should incorporate the contents of that guide into this article ...
 +
 
 +
 
 +
== Installing a 1-DIN aftermarket multimedia player ==
  
  
Line 26: Line 36:
  
  
In both cases, a suitable wiring connector adapter appears to be required:
+
A suitable wiring connector adapter will most likely be required as well (more details in a dedicated chapter below).
* For Jimnys type 1-2: OEM P.N. <font face="Courier">00800-71016-MIC</font>;
 
* For Jimnys type 3-12: OEM P.N. <font face="Courier">00800-71017-MIC</font>;
 
  
  
== Installing a 2-DIN multimedia player ==
+
<gallery widths="400px" heights="300px" class="center" caption="Jimnys with 2005-2018 center console which had had no factory installed Clarion 2-DIN-alike multimedia player">
 +
File:Suzuki Jimny 3 - center dash console (2005+) - E01.jpg|Instead of Clarion multimedia player, there is a clock, a mini storage hole and a 1-DIN sized hole above for a multimedia player of choice. Note that the center console trim around this space is different than in Jimnys 3 with factory installed Clarion 2-DIN-alike multimedia player.
 +
File:Suzuki Jimny 3 - center dash console (2005+) - F01.jpg|View after retrofiting some aftermarket 1-DIN multimedia player.
 +
</gallery>
 +
 
 +
 
 +
== Installing a 2-DIN aftermarket multimedia player ==
  
  
 
* As far as it is known, Suzuki has not predicted that anyone would install an aftermarket 2-DIN multimedia player in a pre-2005 Jimny (with original old interior design).
 
* As far as it is known, Suzuki has not predicted that anyone would install an aftermarket 2-DIN multimedia player in a pre-2005 Jimny (with original old interior design).
 
** Therefore no known official solutions or mounting kits exist for such combination, and it is not known how that endeavor will end up regarding physical and electrical fitment and dash board trim alignment.
 
** Therefore no known official solutions or mounting kits exist for such combination, and it is not known how that endeavor will end up regarding physical and electrical fitment and dash board trim alignment.
*** Report your experiences here!
+
*** All this might be wrong - correct if you know better!
 
* Installing an aftermarket 2-DIN multimedia player in a post-2005 Jimny (with revised interior design) is definitely and officially achievable.
 
* Installing an aftermarket 2-DIN multimedia player in a post-2005 Jimny (with revised interior design) is definitely and officially achievable.
 
** However, the replacement options are a bit complicated / expensive.
 
** However, the replacement options are a bit complicated / expensive.
*** Reason: The dimensions of the hole in the center console trim in which it sits are not standard.
+
*** Reason: The dimensions of the hole in the center console trim in which it sits are not standard, and the wiring connector is not standard.
 
*** Therefore, if you install some aftermarket 2-DIN device, it will probably fit in the hole, but the trim around it will not be aligned.
 
*** Therefore, if you install some aftermarket 2-DIN device, it will probably fit in the hole, but the trim around it will not be aligned.
 
**** There will be some empty non-trim space around the device.
 
**** There will be some empty non-trim space around the device.
** Kits (surrounds) exist which fill the void around the aftermarket 2-DIN CD players, both genuine kits from Suzuki and aftermarket Chinese-made kits.
+
*** Also, a wiring connector adapter will most probably be required.
* Read the wiki article on genuine accessories (linked above) to find out what exact bits and pieces are additionally required (it depends on vehicle edition and if it has previously had a radio player installed from the factory or not).
+
** Wiring connector adapters and bezels / surrounds (which fill the void around the aftermarket 2-DIN CD players) exist, both genuine ones from Suzuki and aftermarket made ones.
 +
* Read the wiki article on genuine accessories (linked above) to find out what exact OEM bits and pieces are additionally required (it depends on vehicle edition and if it has previously had a radio player installed from the factory or not).
 
* [http://www.bigjimny.com/index.php/bigjimny-blog/jimny-modifications/entry/423-radio-installation Here is one practical solution.]
 
* [http://www.bigjimny.com/index.php/bigjimny-blog/jimny-modifications/entry/423-radio-installation Here is one practical solution.]
  
Line 52: Line 67:
  
  
== Upgrading the Clarion player with an add-on ==
+
* It is possible to install almost any 2-DIN multimedia player in a Jimny with revised interior design (2005/2006-2018), but additional bits and pieces are needed for proper fitment.
 +
* Here is an [https://www.suzuki-jimny.info/forum/index.php?thread/23056-pkcologne-s-kiste/&postID=298768#post298768 installation report] from a German guy on installing a Kenwood DDX5015DAB multimedia player.
 +
* Here is another [https://www.suzuki-jimny.info/forum/index.php?thread/27831-radio-aus-bzw-umbau/ installation report] from a German guy on all the bits and pieces needed when installing an aftermarket 2-DIN multimedia player.
 +
 
 +
 
 +
A suitable wiring connector adapter will most likely be required as well (more details in a dedicated chapter below).
 +
 
 +
 
 +
== Wiring connector adapters for aftermarket multimedia players ==
 +
 
 +
 
 +
* All Jimnys 3 use a proprietary wiring connector for the multimedia player.
 +
* Older Jimnys 3 (type 1-2, built from 1998 to approx 2002) use a different connector than newer Jimnys 3 (type 3-12, built from approx 2002 to 2018).
 +
 
 +
 
 +
* Therefore, whichever aftermarket multimedia player is about to be installed (1-DIN or 2-DIN, whichever brand), irrespective of the fact if the vehicle has had or has not had a factory installed multimedia player, a wiring connector adapter from Suzuki's proprietary shape to standard [https://en.wikipedia.org/wiki/Connectors_for_car_audio ISO 40487] shape will most likely be required.
  
  
There is a solution to obtain simple and inituitive MP3 playback without replacing the factory Clarion 2-DIN alike music player.
+
Suzuki offers two models of such OEM connector adapters:
 +
* For Jimnys 3 type 1-2: OEM P.N. <font face="Courier">00800-71016-MIC</font>;
 +
* For Jimnys 3 type 3-12: OEM P.N. <font face="Courier">00800-71017-MIC</font>;
  
  
Installing [http://www.danbp.org/w/Installing_an_USB/SD/MP3/Aux-in_adapter_on_the_Suzuki_Jimny_OEM_Radio '''this'''] simple Chinese-made add-on enables MP3 playback from an SD card, USB stick etc.
+
== Aftermarket sources of adapters and bits ==
  
  
It works quite well and is intuitive, just like playing audio CDs from the Clarion CD player. You can upgrade it with a Bluetooth handsfree from the same manufacturer if you want.
+
There are three known aftermarket manufacturers who make wiring connector adapters and surrounding bezels for the use of aftermarket multimedia units in Jimnys 3:
 +
 
 +
 
 +
[https://autoleads.co.uk Autoleads] from Britain:
 +
* [https://catalog.autoleads.co.uk/catalog/radio-replacement-and-audio-fitting-harness-adaptors/pc2-41-4 PC2-41-4 wiring connector adapter];
 +
** For vehicles built from 1998 to 2003;
 +
* [https://catalog.autoleads.co.uk/catalog/radio-replacement-and-audio-fitting-harness-adaptors/pc2-68-4 PC2-68-4 wiring connector adapter];
 +
** For vehicles built from 2004 to 2018;
 +
* [https://catalog.autoleads.co.uk/catalog/radio-replacement-and-audio-fitting-antenna-adaptors/pc5-55 PC5-55 antenna connector adapter];
 +
** For all production years;
 +
* [https://catalog.autoleads.co.uk/catalog/handsfree-fitting-solutions-accessory-interface-leads-sot/sot-947 SOT-947 soft-lead];
 +
** For vehicles built from 1998 to 2003;
 +
* [https://catalog.autoleads.co.uk/catalog/handsfree-fitting-solutions-accessory-interface-leads-sot/sot-071 SOT-071 soft-lead];
 +
** For vehicles built from 2004 to 2018;
 +
 
 +
 
 +
[https://connects2.com Connects2] from Britain:
 +
* [https://connects2.com/Product/ProductItem/CT23SZ08 CT23SZ08 2-DIN surrounding bezel incl. entire center console trim];
 +
** For vehicles built from 2005/2006 to 2018;
 +
** Purchasing this expensive set makes sense only if your center console trim is somehow damaged;
 +
* [https://connects2.com/Product/ProductItem/CT23SZ16 CT23SZ16 2-DIN surrounding bezel], model 1;
 +
** For vehicles built from 2005/2006 to 2018;
 +
* [https://connects2.com/Product/ProductItem/CT24UV26 CT24UV26 2-DIN surrounding bezel], model 2;
 +
** For vehicles built from 2005/2006 to 2018;
 +
* [https://connects2.com/Product/ProductItem/CT24SZ06 CT24SZ06 1-DIN bezel for 2-DIN-alike hole];
 +
** For vehicles built from 2005/2006 to 2018;
 +
* [https://connects2.com/Product/ProductItem/CT24UV28 CT24UV28 1-DIN pocket];
 +
** To fill the remaining empty space in the large hole when using a 1-DIN multimedia unit;
 +
* [https://connects2.com/Product/ProductItem/CT20SZ01 CT20SZ01 wiring connector adapter];
 +
** For vehicles built from 1998 to 2002;
 +
* [https://connects2.com/Product/ProductItem/CT20HD02 CT20HD02 wiring connector adapter], model 1;
 +
** For vehicles built from 2002 to 2018;
 +
* [https://connects2.com/Product/ProductItem/CT20SZ02 CT20SZ02 wiring connector adapter], model 2;
 +
** For vehicles built from 2002 to 2018;
 +
* [https://connects2.com/Product/ProductItem/CT10SZ01 CT10SZ01 "T-setup" wiring connector splitter / adapter];
 +
** For vehicles built from 2002 to 2018;
 +
 
 +
 
 +
[http://www.carav-parts.com Carav] from China:
 +
* Many other "virtual" brands sell their products as their own;
 +
* [http://carav-parts.com/index.php?searchword=11-357&ordering=&searchphrase=all&Itemid=56&option=com_search 11-357 2-DIN surrounding bezel];
 +
** For vehicles built from 2005/2006 to 2018;
 +
* [http://carav-parts.com/index.php?searchword=12-012&ordering=&searchphrase=all&Itemid=56&option=com_search 12-012 wiring connector adapter];
 +
** For vehicles built from 2002 to 2018;
 +
* [http://carav-parts.com/index.php?searchword=12-212&ordering=&searchphrase=all&Itemid=56&option=com_search 12-212 "T-setup" wiring connector splitter / adapter];
 +
** For vehicles built from 2002 to 2018;
 +
 
 +
 
 +
The "T-setup" wiring connector splitter / adapters are useful when installing additional multimedia devices apart from the multimedia player (like some Parrot bluetooth handsfree devices), as well as when installing some aftermarket sound amplifiers in certain wiring setups.
 +
 
 +
Note about some Connects2 products: The actual differences between CT23SZ16 and CT24UV26, as well as between CT20HD02 and CT20SZ02, are unknown.
 +
 
 +
 
 +
These products can usually be bought online in places like Ebay, Amazon, Aliexpress, etc. but also in specialized vehicle multimedia accessory shops like [https://www.dynamicsounds.co.uk/search.html&search=jimny DynamicSounds].
 +
 
 +
 
 +
== Expanding the multimedia capabilities of a Clarion player ==
 +
 
 +
 
 +
[[File:Suzuki Jimny 3 - center dash console (2005+) - G01.jpg|600px|thumb|left|Appearance of the center console in a Jimny 3 with factory installed Clarion PS-2685 multimedia player]]
 +
<br clear=all>
 +
 
 +
Instead of replacing the factory Clarion PS-2685 2-DIN alike music player, it is quite possible (and relatively cheap) to significantly expand its capabilities:
 +
* There is an aftermarket add-on Chinese device [http://www.ycarlink.com/pd_16902_Car-Digital-USB-adapter-for-OEM-Clarion-radio-stereo-Suzuki-Swift-Jimny-GRAND-VITARA-SX4-with-CE-NET-port.htm '''Yatour YT-M06'''], which enables simple and intuitive MP3/WMA playback from an SD card, USB stick etc. directly through the Clarion player.
 +
** Yatour YT-M06 can also be optionally upgraded with a Bluetooth handsfree kit [http://www.ycarlink.com/pd_16665_Yatour-Bluetooth-Module-Kit-YT-BTM-.htm '''Yatour YT-BTM'''], which then works seamlessly with a Clarion player (answering calls, hearing the other speaker on vehicle speakers, ending calls, etc.).
 +
* Yatour YT-M06 has been proven to work quite reliably in practice, in various temperature and humidity conditions.
 +
* It also works quite intuitively - MP3/WMA music files are played in an identical manner like selecting CD tracks on a Clarion CD player.
 +
* Caution when buying: Yatour YT-M06 exists in several editions (for various car brands / factory radio systems).
 +
** The editions which are compatible with Jimnys (Clarion CE-NET radio system) are <font face="Courier">YTM06-CLAR</font> and <font face="Courier">YTM06-SUZ1</font>.
 +
*** Both editions are identical - they are just named differently depending on a seller.
 +
 
 +
 
 +
[[File:Suzuki Jimny 3 - radio Clarion PS-2685 - specifications.jpg|640px|thumb|left|Technical specifications of Clarion PS-2685, taken from its original documentation]]
 +
<br clear=all>
 +
 
 +
{{note|A Jimny owner from Brazil wrote a very good [https://www.danbp.org/p/en/node/102 '''"how to" installation guide'''] for installing Yatour YT-M06 add-on to a Clarion radio.}}
 +
 
 +
 
 +
== Additional info ==
 +
 
 +
The following forum topics contain additional useful info (someone should incorporate the info from them into this article):
 +
# [https://www.bigjimny.com/index.php/forum/6-jimny-chat/51322-double-din-radio-trim-for-later-jimnys Forum topic 1];
 +
# [https://www.bigjimny.com/index.php/forum/7-jimny-technical/51623-single-din-facia-where-can-i-get-this-part Forum topic 2];
 +
# [http://www.bigjimny.com/index.php/forum/7-jimny-technical/51495-help-06-jimny-sound-system Forum Topic 3];
  
  
 
{{Edited}}
 
{{Edited}}
[[Category:Infotainment]]
+
 
[[Category:Accessories]]
+
[[Category:Infotainment - gen3]]
 +
[[Category:Accessories - gen3]]

Latest revision as of 13:00, 3 December 2019

Note Icon.pngThe content of any article might be expanded / improved in the future - revisit it sometimes.
Note Icon.pngSeen a mistake? Know something that isn't written? Edit and change this article yourself!
Note Icon.pngSome images in the article (if present) can be enlarged by clicking on them.


Note Icon.pngThis article is just an embryo. It is an idea for someone to "pick up" onto and to expand the article further.



Introduction

Note Icon.pngThe wiki article "Accessories for Jimny (genuine Suzuki)" contains vast info and details on many OEM Jimny accessories, including a dedicated section on various officially compatible multimedia players and corresponding mounting kits (look in the section "Interior infotainment").



Center dash panel removal guide

Whether replacing or upgrading the OEM multimedia player, you will need to remove the center dash panel first.

Quick illustrated guide on how to remove the center dash panel

Someone should incorporate the contents of that guide into this article ...


Installing a 1-DIN aftermarket multimedia player

According to official Suzuki accessories catalogues, apart from a desired 1-DIN multimedia player itself, additional bits and pieces are needed for proper installation. The following below should be valid for any Jimny production year.


If the vehicle already has an (undesired) factory installed radio player:

  • An OEM mounting kit for a single DIN multimedia device, P.N. 990E0-59J55-000;


If the vehicle does not have a factory installed radio:

  • An OEM screw to install a single DIN radio, P.N. 990E0-59J55-SCR;
    • Four pieces are needed;


A suitable wiring connector adapter will most likely be required as well (more details in a dedicated chapter below).



Installing a 2-DIN aftermarket multimedia player

  • As far as it is known, Suzuki has not predicted that anyone would install an aftermarket 2-DIN multimedia player in a pre-2005 Jimny (with original old interior design).
    • Therefore no known official solutions or mounting kits exist for such combination, and it is not known how that endeavor will end up regarding physical and electrical fitment and dash board trim alignment.
      • All this might be wrong - correct if you know better!
  • Installing an aftermarket 2-DIN multimedia player in a post-2005 Jimny (with revised interior design) is definitely and officially achievable.
    • However, the replacement options are a bit complicated / expensive.
      • Reason: The dimensions of the hole in the center console trim in which it sits are not standard, and the wiring connector is not standard.
      • Therefore, if you install some aftermarket 2-DIN device, it will probably fit in the hole, but the trim around it will not be aligned.
        • There will be some empty non-trim space around the device.
      • Also, a wiring connector adapter will most probably be required.
    • Wiring connector adapters and bezels / surrounds (which fill the void around the aftermarket 2-DIN CD players) exist, both genuine ones from Suzuki and aftermarket made ones.
  • Read the wiki article on genuine accessories (linked above) to find out what exact OEM bits and pieces are additionally required (it depends on vehicle edition and if it has previously had a radio player installed from the factory or not).
  • Here is one practical solution.


  • Most Jimnys with revised interior design (produced between 2005 and 2018) have a factory-installed 2-DIN-alike Clarion radio-CD player (typically installed from cca 2005 onwards).
    • That Clarion player can only play audio CDs, and is quite fussy about which ones it accepts.
    • That player fits perfectly in the hole in the center dash board trim because it is not a standard 2-DIN format - it is custom-made for Jimnys.


  • It is possible to install almost any 2-DIN multimedia player in a Jimny with revised interior design (2005/2006-2018), but additional bits and pieces are needed for proper fitment.
  • Here is an installation report from a German guy on installing a Kenwood DDX5015DAB multimedia player.
  • Here is another installation report from a German guy on all the bits and pieces needed when installing an aftermarket 2-DIN multimedia player.


A suitable wiring connector adapter will most likely be required as well (more details in a dedicated chapter below).


Wiring connector adapters for aftermarket multimedia players

  • All Jimnys 3 use a proprietary wiring connector for the multimedia player.
  • Older Jimnys 3 (type 1-2, built from 1998 to approx 2002) use a different connector than newer Jimnys 3 (type 3-12, built from approx 2002 to 2018).


  • Therefore, whichever aftermarket multimedia player is about to be installed (1-DIN or 2-DIN, whichever brand), irrespective of the fact if the vehicle has had or has not had a factory installed multimedia player, a wiring connector adapter from Suzuki's proprietary shape to standard ISO 40487 shape will most likely be required.


Suzuki offers two models of such OEM connector adapters:

  • For Jimnys 3 type 1-2: OEM P.N. 00800-71016-MIC;
  • For Jimnys 3 type 3-12: OEM P.N. 00800-71017-MIC;


Aftermarket sources of adapters and bits

There are three known aftermarket manufacturers who make wiring connector adapters and surrounding bezels for the use of aftermarket multimedia units in Jimnys 3:


Autoleads from Britain:


Connects2 from Britain:


Carav from China:


The "T-setup" wiring connector splitter / adapters are useful when installing additional multimedia devices apart from the multimedia player (like some Parrot bluetooth handsfree devices), as well as when installing some aftermarket sound amplifiers in certain wiring setups.

Note about some Connects2 products: The actual differences between CT23SZ16 and CT24UV26, as well as between CT20HD02 and CT20SZ02, are unknown.


These products can usually be bought online in places like Ebay, Amazon, Aliexpress, etc. but also in specialized vehicle multimedia accessory shops like DynamicSounds.


Expanding the multimedia capabilities of a Clarion player

Appearance of the center console in a Jimny 3 with factory installed Clarion PS-2685 multimedia player


Instead of replacing the factory Clarion PS-2685 2-DIN alike music player, it is quite possible (and relatively cheap) to significantly expand its capabilities:

  • There is an aftermarket add-on Chinese device Yatour YT-M06, which enables simple and intuitive MP3/WMA playback from an SD card, USB stick etc. directly through the Clarion player.
    • Yatour YT-M06 can also be optionally upgraded with a Bluetooth handsfree kit Yatour YT-BTM, which then works seamlessly with a Clarion player (answering calls, hearing the other speaker on vehicle speakers, ending calls, etc.).
  • Yatour YT-M06 has been proven to work quite reliably in practice, in various temperature and humidity conditions.
  • It also works quite intuitively - MP3/WMA music files are played in an identical manner like selecting CD tracks on a Clarion CD player.
  • Caution when buying: Yatour YT-M06 exists in several editions (for various car brands / factory radio systems).
    • The editions which are compatible with Jimnys (Clarion CE-NET radio system) are YTM06-CLAR and YTM06-SUZ1.
      • Both editions are identical - they are just named differently depending on a seller.


Technical specifications of Clarion PS-2685, taken from its original documentation


Note Icon.pngA Jimny owner from Brazil wrote a very good "how to" installation guide for installing Yatour YT-M06 add-on to a Clarion radio.



Additional info

The following forum topics contain additional useful info (someone should incorporate the info from them into this article):

  1. Forum topic 1;
  2. Forum topic 2;
  3. Forum Topic 3;



Page last edited on 3/12/2019 by user Bosanek