Difference between revisions of "Drive belts"
(Created page with "== Drive Belts == This section covers the engine drive belts, their configurations and adjustment. There are a number of combinations and it is essential you get the correct...") |
|||
| Line 27: | Line 27: | ||
Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner | Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner | ||
<br clear=all> | <br clear=all> | ||
| + | === Torque Settings === | ||
| + | Full details of the torque settings can be found in the [[Torque#Engine | reference data]] | ||
| + | {{Edited}} | ||
| + | [[Category:Howto]][[Category:Forecourt]][[Category:Engine]] | ||
Revision as of 19:57, 16 May 2016
Contents
Drive Belts
This section covers the engine drive belts, their configurations and adjustment.
There are a number of combinations and it is essential you get the correct belt.
G13BB with Power Steering
Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
G13BB with Power Steering and Aircon
Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner
M13AA with Power Steering
Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
M13AA with Power Steering and Aircon
Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
M13AA with Aircon
Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
Torque Settings
Full details of the torque settings can be found in the reference data
Page last edited on 16/05/2016 by user Mlines
