×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

My 57 jimny

More
19 Sep 2016 10:19 #172567 by 2013gary
Replied by 2013gary on topic My 57 jimny
Nice Jimny... and tastefully modded

Gary

Please Log in or Create an account to join the conversation.

  • Brebaz
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Sep 2016 13:00 #172605 by Brebaz
Replied by Brebaz on topic My 57 jimny
Since I had a quietc day at work I decided to take my bullbar and front spots off as the bullbar sit's to low for my liking! And I'm going out green laneing on Sunday :-)
Attachments:

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
20 Sep 2016 14:23 #172606 by Daniel30
Replied by Daniel30 on topic My 57 jimny
looking good you should have a little trim at the side as well ;) ;) ;) ;)

Attachments:

Please Log in or Create an account to join the conversation.

  • Brebaz
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Sep 2016 14:24 #172607 by Brebaz
Replied by Brebaz on topic My 57 jimny
Yea I'm going to :-) just need to get a grinding disc :D

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
20 Sep 2016 15:02 #172609 by Daniel30
Replied by Daniel30 on topic My 57 jimny
nic, i used a slitting disk its very thin and cut through easily just take care of the hot plastic that comes off when cutting it burns your hands
(if you don't know already about the slitting disk) :) :) :)

Please Log in or Create an account to join the conversation.

  • Brebaz
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Sep 2016 16:19 #172611 by Brebaz
Replied by Brebaz on topic My 57 jimny
Done it :-D

Attachments:

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
20 Sep 2016 16:25 #172612 by Daniel30
Replied by Daniel30 on topic My 57 jimny
Wow that was quick I just stared at mine for days before chopping it off !!!! :)

Please Log in or Create an account to join the conversation.

  • Brebaz
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Sep 2016 18:15 #172613 by Brebaz
Replied by Brebaz on topic My 57 jimny

Daniel30 wrote: Wow that was quick I just stared at mine for days before chopping it off !!!! :)


Got an early finish at work so thought I might aswell take the grinder home :P

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
20 Sep 2016 18:18 #172614 by Riccy
Replied by Riccy on topic My 57 jimny


this is what you need to tidy it up :-)

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus
Attachments:

Please Log in or Create an account to join the conversation.

  • Brebaz
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Sep 2016 18:19 #172615 by Brebaz
Replied by Brebaz on topic My 57 jimny

Riccy wrote:



this is what you need to tidy it up :-)


I'm love that! Where is it from?

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
20 Sep 2016 18:36 #172616 by Riccy
Replied by Riccy on topic My 57 jimny
got the welder out and some box steel, steel plate, etc. made it, had it powder coated and bolted it onto the new HD towpoints. cost about £100 to make and powder coat.

mine has a 2" body lift also so i had to make it to fit the space and wrap around under the anti roll bar brackets to the original lower bumper mounts. the original bumper has screws behind the number plate so have used them onto the new bar for a solid mounting. its an odd shape so i couldn't buy one, other than custom made.

its the mark I tho, as i think it needs to go a bit further at either side around the cutoff bumper. and the folded bash plate thing is only 2mm plate so a bit thin for hardcore protection. i mainly made it to tidy up the look of it however so not a problem for me.

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

  • Brebaz
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Sep 2016 18:42 #172617 by Brebaz
Replied by Brebaz on topic My 57 jimny
Wish I was clever enough to make stuff!

I can weld but I'm just shit at desigoing haha

Please Log in or Create an account to join the conversation.

Time to create page: 0.208 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.