×
Slow Forum - update (15 Feb 2018)

I have found an issue within the persistent session database (this is what keeps you logged into the system).

I have reset the database (which will have logged everyone out) and will see how the system performs

It seems a lot quicker

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Little knock/clunk when moving off.

More
14 Nov 2017 16:43 #186241 by weecorey
weecorey created the topic: Little knock/clunk when moving off.
I've noticed a little knock/clunk when I move off in the Jimny, seems to be coming front drivers side, just one knock within the first 10 meters.

I have just replaced the kingpin bearings, swivel seals, drop links and I removed the drive shafts and cleaned out the cv joints and re greased. That was about 200 miles ago and this has just appeared.

Any ideas?

Please Log in or Create an account to join the conversation.

More
14 Nov 2017 16:59 #186245 by NicBeeee
NicBeeee replied the topic: Re:RE: Little knock/clunk when moving off.

weecorey wrote: I've noticed a little knock/clunk when I move off in the Jimny, seems to be coming front drivers side, just one knock within the first 10 meters.

I have just replaced the kingpin bearings, swivel seals, drop links and I removed the drive shafts and cleaned out the cv joints and re greased. That was about 200 miles ago and this has just appeared.

Any ideas?

Check your CV joint bolts are all tight,


Sent from my F3111 using Tapatalk

Please Log in or Create an account to join the conversation.

More
14 Nov 2017 17:28 #186247 by jackonlyjack
jackonlyjack replied the topic: Re:RE: Little knock/clunk when moving off.
Radius arm bolts maybe give them a little tighten ;)

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.053 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.