×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - EARLY BIRD DISCOUNTED PRICE
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Is Wheel Centre Bore Measurement Vital?
- Venter
- Topic Author
- Visitor
-
Public
23 Jun 2017 22:46 #182259
by Venter
Is Wheel Centre Bore Measurement Vital? was created by Venter
Looking at the only ET-30 steel wheels I can find online, the CB measurement is 110mm, whereas the 2009 Jimny has a CB of 105mm. I can't find any spigots applicable to this, so was wondering whether Jimnys are hub-centric of if it's just the bolts that matter?
And as an aside, anyone know where else is selling offset steelies? Jimnybits only has non-offset 15's in stock, and the other place is Direct4x4 witht the CB issue.
And as an aside, anyone know where else is selling offset steelies? Jimnybits only has non-offset 15's in stock, and the other place is Direct4x4 witht the CB issue.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1936
- Thank you received: 554
- Points: 7523.00
24 Jun 2017 06:22 #182260
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic Is Wheel Centre Bore Measurement Vital?
On my steelies they are nut-centric (and must be balanced as such). The centre bore isnt resting on anything as i have spacers on.
I would assume that the larger centre bore wouldnt matter then?
I would assume that the larger centre bore wouldnt matter then?
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
- Venter
- Topic Author
- Visitor
-
Public
24 Jun 2017 10:20 #182262
by Venter
Replied by Venter on topic Is Wheel Centre Bore Measurement Vital?
That's pretty much what I was thinking, doesn't make sense that central hub would have any influence if it's not bearing any weight.
Now just to find some wheels, not many shops out there doing them at the minute, especially in any colours other than black. Rhinorays had a few but his site no longer works.
Now just to find some wheels, not many shops out there doing them at the minute, especially in any colours other than black. Rhinorays had a few but his site no longer works.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 4706
- Thank you received: 260
- Points: 495.00
24 Jun 2017 17:32 #182265
by helijohn
It's just my opinion but when I was looking to fit some rims to one of my motors I had to read a lot online about this and came to the conclusion it is important.
Replied by helijohn on topic Is Wheel Centre Bore Measurement Vital?
Venter wrote: Looking at the only ET-30 steel wheels I can find online, the CB measurement is 110mm, whereas the 2009 Jimny has a CB of 105mm. I can't find any spigots applicable to this, so was wondering whether Jimnys are hub-centric of if it's just the bolts that matter?
It's just my opinion but when I was looking to fit some rims to one of my motors I had to read a lot online about this and came to the conclusion it is important.
Please Log in or Create an account to join the conversation.
Time to create page: 0.123 seconds