×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

ORA Chassiss Mount Guard

More
10 Jun 2017 18:19 - 10 Jun 2017 21:08 #181908 by HUN
ORA Chassiss Mount Guard was created by HUN
Hello Guys,

I will take my Jimny to a garage in August for upgrading the suspension and changing bushes, bearings & seals wherever it's needed. Fitting of ORA chassis guards is part of this job and I want to make sure they follow the factory instructions (even if it's obvious what to do). Has anyone ever come across the genuine fitting instructions from ORA? As far as I know they used to supply colorful PDF documents with photos of each step for their products but I could not find to download it anywhere. ORA's Product Code is: SMG100

Any help much apprecipiated.

Regards, Gabor

TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers
Attachments:
Last edit: 10 Jun 2017 21:08 by HUN.

Please Log in or Create an account to join the conversation.

More
12 Jun 2017 11:36 - 12 Jun 2017 11:37 #181929 by X8GGY
Replied by X8GGY on topic ORA Chassiss Mount Guard
Hi, I've had a look and can't locate and fitting instructions for them, but...



They just slip over the existing chassis mounts, with the thick spacer washers in-between the guard and the mount, then use the slightly longer M12 x 120mm bolts to go through instead of the existing M12 x 100mm. The smaller bolts (M8 x 25mm) then go through the small hole (they'll need to drill through the chassis mount underneath, the long triangle slots are there to get a spanner onto the nut inside...



And the same on the front...
Last edit: 12 Jun 2017 11:37 by X8GGY.

Please Log in or Create an account to join the conversation.

More
12 Jun 2017 11:52 #181930 by X8GGY
Replied by X8GGY on topic ORA Chassiss Mount Guard
Just been outside to lie on the ground and take these...



Attachments:

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
12 Jun 2017 17:25 #181933 by Lambert
Replied by Lambert on topic ORA Chassiss Mount Guard
I hate to say this but it looks a bit raw under there?or is it just red clay you haven't cleaned off?

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
12 Jun 2017 18:00 #181934 by X8GGY
Replied by X8GGY on topic ORA Chassiss Mount Guard

11/60 wrote: I hate to say this but it looks a bit raw under there?or is it just red clay you haven't cleaned off?


That'll be some of Oldhamshire stuck to it ;)

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
13 Jun 2017 04:18 #181959 by Lambert
Replied by Lambert on topic ORA Chassiss Mount Guard
Ah that's ok then.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
14 Jun 2017 05:56 #181992 by HUN
Replied by HUN on topic ORA Chassiss Mount Guard
Awesome! Thank you very much Dave!

TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers

Please Log in or Create an account to join the conversation.

Time to create page: 0.125 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.