-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Metal clunking noise from back axle
×
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Metal clunking noise from back axle
Less
More
-
Posts: 141
-
Thank you received: 19
-
Points: 0.00
-
-
01 Feb 2014 10:02 #102825
by mc_nebula
natashajohny wrote: I'm not sure if it is specifically a wheel/brake problem but it could be your rear sway bar/end-link.
Also, I suffered really bad noise cornering from the rear (and play in my steering) I tracked it down to the rose jointed panhard rods sold by Off Road Armoury. I contacted them about it, but they refused to accept that it could be their part causing my issues. Replacing with Jimny Bits panhards (bushed, not rose joints) solved my issues totally.
Please Log in or Create an account to join the conversation.
-
mike83
-
-
Visitor
-
Public
22 Aug 2017 11:18 #183542
by mike83
Thread resurrection again...
Mine did it with stock springs and has continued to do it since running +2 inch springs.
If you look under at the top spring mount on the chassis side a couple of inch down there is a small rectangle tab of metal. Its this stupid appendage that the spring catches on during articulation up or down. Mines a y plate.
Take the springs off and hammer the bleeding thing flat out of the way. Jobs a goodun.
Hope this might help someone.
Please Log in or Create an account to join the conversation.
-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Metal clunking noise from back axle
Time to create page: 0.076 seconds