×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

My Chiffon Ivory JB74 SZ5 - blog/mods/build thread

More
11 Jul 2020 22:30 #224845 by Scimike

Lambert wrote: I miss the days of going into the parts counter and waiting 10 minutes for a shop coat to wander into the shelves and return with the parts I needed in hand.

I also miss this and it's very much a modern vehicle thing. Luckily I can still get my fix (pre Virus) at Paddocks for my 1960 Land Rover, I walk in with an obscure part and the chap on the counter goes and gets a new one. Never been able to stump them, same happens at Ecas for my 2CV parts.
I guess the common ground here is that the manufacture's no longer has any interest in the vehicles and so part support is being provided specialist.

Yokohama Geolanders, Sony head unit, NAUTILUS Air Horn, DRL conversion, Rear cargo space, Elvis Bobblehead, transfer Guard, Indian hanging Elephant, Koni Heavy track dampers, Custom SS exhaust, Voodoo Doll, Adventure Rack with LED ight bar, vintage ERIBA caravan usually attached (yes it's slow)

Please Log in or Create an account to join the conversation.

More
13 Jul 2020 19:02 #225014 by 300bhpton
Transfer box update 3


So the dealership called mid afternoon. Pleasant surprise, the Jimny was ready for collection. I had in my mind it would be Thursday. So thumbsup for the speedy turnaround :)

They replaced the transfer box with another unit. I don't know any specifics or if anything else was changed/adjusted.

I have been and tested it this evening. And thus far (fingers crossed....) it has worked perfectly. So I'm hoping this has solved the problem and that is was just a freak occurrence.

I gave it quite a good testing this evening and drove through every cross axle situation I could find or know of on our off road test section. In the interests of scientific endeavour. I will of course conduct these experiments through-out the rest of the week. Just to make sure :D









The curtesy Ignis is gone. Not that it was a bad car I'm sure. But the Jimny is so much more. As in much nicer to sit in and drive.

Now I can see about getting re-booked in for the tyres to be changed. Then maybe a spot of laning.
The following user(s) said Thank You: Reason2doubt, lookonimages

Please Log in or Create an account to join the conversation.

More
13 Jul 2020 19:26 #225017 by Soeley

Please Log in or Create an account to join the conversation.

More
13 Jul 2020 19:52 #225020 by DAGZOOK
Glad to hear you've got it sorted 300, it sounds like you were very unlucky with that sort of issue. Sadly some of these Suzuki dealers are part of wider franchises. Some are better than others! You obviously found a good egg in the end.

Please Log in or Create an account to join the conversation.

  • flux-capacitor
  • Visitor
  • Visitor
    Public
14 Jul 2020 19:31 #225094 by flux-capacitor
Replied by flux-capacitor on topic My JB74 SZ5 - blog/mods/build thread

300bhpton wrote: there is small tray below the dash in front of the gearstick. Conveniently placed near the only USB port. Hooray, somewhere to place your smartphone. Yet, alas no. The tray is fine for a decade old iPhone 5, but a modern larger phone does not fit. Come on Suzuki, how can you make such a basic error! It is unforgivable, well almost.


If I had the precise dimensions of that small tray (bottom Length × Width; top Length × Width; vertical height; corner radii) I may come up with a groundbreaking working solution. I already manufactured dedicated custom CarPlay docks for pretty much all iPhone models in the past, for other vehicles.

My father was about to buy a new Jimny when the car was unexpectedly withdrawn by Suzuki due to pollution fees :( So it's up to you lucky owners to make these measurements and give them to me. Howto: mold the inner part of the tray with some special paste (e.g. alginate dental paste or Plasticine, or any other similar adequate modling paste) then mp me with pictures. The first person who would mail me a good moulded inner part of the tray would gain a free dock for his/her phone :)

Another solution: find the OEM reference of that little piece of plastic, the front tray below the USB port, if it's available somewhere separately (it comes with all new Jimnys with manual gearbox) so that I could order one and design a dock that would perfectly fit. Then, you would just have to slide your smartphone vertically into the iPhone Carplaydock when sitting in the car, to automatically connect it to the head unit! That would be pretty cool, wouldn't it?

Please Log in or Create an account to join the conversation.

More
14 Jul 2020 19:38 - 14 Jul 2020 19:38 #225095 by mlines
OEM reference appears to be 75810-77R00-5PK

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 14 Jul 2020 19:38 by mlines.
The following user(s) said Thank You: flux-capacitor

Please Log in or Create an account to join the conversation.

  • flux-capacitor
  • Visitor
  • Visitor
    Public
14 Jul 2020 19:43 #225096 by flux-capacitor
Replied by flux-capacitor on topic My JB74 SZ5 - blog/mods/build thread
Wow, nice find! That was fast ;)
Thanks. I will try to find some place with cheaper parts & shipping than ordering one from Japan. But it's good to see that it is available. Will keep you updated here.

Please Log in or Create an account to join the conversation.

More
14 Jul 2020 19:44 #225097 by mlines

flux-capacitor wrote: Wow, nice find! That was fast ;)
Thanks. I will try to find some place with cheaper parts & shipping than ordering one from Japan. But it's good to see that it is available. Will keep you updated here.

I have just requested a price, should arrive later

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
14 Jul 2020 20:17 #225098 by mlines
Just got a quote from Suzuki, £28.80 plus postage to wherever you are (UK - £5.10)

However it is not in UK warehouse, Germany warehouse or Romania warehouse. Therefore it is a back order item with an uncertain lead time.

If you want it I can order but it might be a wait. I can ask Japan for an estimate for delivery if you are serious.

Martin

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: flux-capacitor

Please Log in or Create an account to join the conversation.

More
14 Jul 2020 20:29 #225099 by 300bhpton

flux-capacitor wrote: Wow, nice find! That was fast ;)
Thanks. I will try to find some place with cheaper parts & shipping than ordering one from Japan. But it's good to see that it is available. Will keep you updated here.


Not sure I would be any help with getting a mould tbh. Don’t really have the stuff to do it. Also not sure how to measure the radii

I would be interested in the item you are saying about creating though. Where are you in the UK? I guess if the distance is sensible I could drive to you if you wanted to take a mould. I’m in the Beds/Bucks area.

Please Log in or Create an account to join the conversation.

  • flux-capacitor
  • Visitor
  • Visitor
    Public
14 Jul 2020 21:51 #225105 by flux-capacitor
Replied by flux-capacitor on topic My JB74 SZ5 - blog/mods/build thread
Sorry 300bhpton, you're a bit too far as I live in France ;) but yes I'm serious about it. I am in love with the new Jimny. I could show you the docks I have already made for another car but I'm not sure if the forum rules are OK with semi-advertising URLs. Anyway, I can answer any question by mp.

Please Log in or Create an account to join the conversation.

  • flux-capacitor
  • Visitor
  • Visitor
    Public
14 Jul 2020 22:45 - 14 Jul 2020 22:46 #225107 by flux-capacitor
Replied by flux-capacitor on topic Re:My JB74 SZ5 - blog/mods/build thread

mlines wrote: Just got a quote from Suzuki, £28.80 plus postage to wherever you are (UK - £5.10)

However it is not in UK warehouse, Germany warehouse or Romania warehouse. Therefore it is a back order item with an uncertain lead time.

If you want it I can order but it might be a wait. I can ask Japan for an estimate for delivery if you are serious.

Martin

Sent from my Pixel 2 XL using Tapatalk


Martin, I have found it in Germany at 25.25 € VAT and shipping included, so a total of about £22.92. I think I will order it. The price would be higher shipping from Japan in my opinion. I have found it at an even lower price elsewhere, but from a seller in the United Arab Emirates and through a Russian web site… I won't risk registering bank & personal info to check if this one is legit or not.
Last edit: 14 Jul 2020 22:46 by flux-capacitor.

Please Log in or Create an account to join the conversation.

Time to create page: 0.184 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.