×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

My Jimny named R&B

More
23 Jun 2020 06:53 #223891 by kirkynut
Replied by kirkynut on topic My Jimny named R&B
If you're anywhere near Sussex, Rhino Ray will make a cage for a reasonable price I believe.

A friend did mine for me in South Essex.

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

More
30 Jun 2020 16:16 #224293 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
Time for front axle strip down

Paint my swivel's
Trailgear shafts n cv's
26 spline side gears
And new kingpin bearings if needed
;)
Attachments:

Please Log in or Create an account to join the conversation.

More
26 Jul 2020 15:06 - 07 Aug 2020 07:36 #225702 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
Por15 on the swivel's


Modified landy engine mounts to fit transfer cradle



Measurements

X2 cut to fit driver side

This one cut and shaped to fit Redacted cradle
Not sure you would need to modify for standard transfer mounts
Attachments:
Last edit: 07 Aug 2020 07:36 by kirkynut.

Please Log in or Create an account to join the conversation.

More
29 Jul 2020 18:20 #225831 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
Modified bushes fitted

While i was under their had a look at rear engine mount
Central bolt looked off to oneside
So got a new one from the spares shelf

Old one not delaminated but rubber really soft
Attachments:

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
30 Jul 2020 17:02 #225864 by Riccy
Replied by Riccy on topic My Jimny named R&B
They look a good fit B)

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus
The following user(s) said Thank You: jackonlyjack

Please Log in or Create an account to join the conversation.

More
30 Jul 2020 18:18 #225871 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
They do fit well Riccy
Got fed up of the bolt through one's moving to one side slightly. think that's due to the bolt through's only being M8
Landy one's are M10 so no movement to be had,the transfer is lifted around 15mm higher up now ;)
Expecting some vibration from them....but knowing they are now super strong i can live with vibration :laugh:

Please Log in or Create an account to join the conversation.

More
07 Aug 2020 07:41 #226199 by kirkynut
Replied by kirkynut on topic My Jimny named R&B

jackonlyjack wrote: They do fit well Riccy
Got fed up of the bolt through one's moving to one side slightly. think that's due to the bolt through's only being M8
Landy one's are M10 so no movement to be had,the transfer is lifted around 15mm higher up now ;)
Expecting some vibration from them....but knowing they are now super strong i can live with vibration :laugh:


Does your transfer box not hit the floor of the Jimny? Do you have a body lift?

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

More
07 Aug 2020 07:56 #226200 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
Kirkynut yes i have a 1" body lift fitted
Also it drives/feels better than with the bolt through's on
No noticeable vibrations :)

Please Log in or Create an account to join the conversation.

More
07 Aug 2020 09:02 #226206 by kirkynut
Replied by kirkynut on topic My Jimny named R&B
Ah, I just re-read your thread to see the 1" body lift.

I might consider doing a 1" body lift just to enable me to do this at some distant point in the future.

I'll likely get a normal car next year for daily duties, so it won't be as necessary but I will have more time to do it.

Well done for working this out. I for one am grateful.

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

More
09 Aug 2020 13:53 - 09 Aug 2020 15:08 #226393 by jackonlyjack
Replied by jackonlyjack on topic My Jimny
Gave him a makeover/facelift just for laughs.......it won't last long given the terrain I drive......but looks B)
Attachments:
Last edit: 09 Aug 2020 15:08 by jackonlyjack.

Please Log in or Create an account to join the conversation.

More
07 Nov 2020 17:22 #229783 by jackonlyjack
Replied by jackonlyjack on topic My Jimny
New to me landy rims 16"x5.5"
These have a +et of 33
So when adaptors are fitted it will leave me at
+3 et/offset
Attachments:

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
07 Nov 2020 17:49 #229784 by Lambert
Replied by Lambert on topic My Jimny
Ooh that's interesting. Thanks for sharing. Off to go see what the offset is on range rover rosytles.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

Time to create page: 0.191 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.