×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
shocks
Less
More
- Posts: 32
- Thank you received: 0
- Points: 0.00
Less
More
- Posts: 32
- Thank you received: 0
- Points: 0.00
Less
More
- Posts: 32
- Thank you received: 0
- Points: 0.00
07 Jul 2009 14:05 #955
by Jamie
tiny wrote:
Hi Tiny,
Errmmmm only a little bit on the rear of the front arch
around an inch by about three inch has been removed it sound's
worse than it is.
However, i have a 3" suspension lift and a 2" body lift.
Ideally i could do with trimming them all the way around
as they do rub ever so slightly on the rear when at max articulaton
which is not too often so i havn't bothered.
Jamie
DO the tyres rub or have you had to trim the arches out
thanks tim
Hi Tiny,
Errmmmm only a little bit on the rear of the front arch
around an inch by about three inch has been removed it sound's
worse than it is.
However, i have a 3" suspension lift and a 2" body lift.
Ideally i could do with trimming them all the way around
as they do rub ever so slightly on the rear when at max articulaton
which is not too often so i havn't bothered.
Jamie
Please Log in or Create an account to join the conversation.
08 Jul 2009 04:03 #959
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
I have a set of Procomp shockers on mine but they were put on by the previous owner and I dontt know what they are.
It is clear that they rubbed on the springs at some point as they have marks / slight dents in them. I have a KAP 3 inch lift. The previous owner just apaced them out a little with penny washers until they didn't quite rub and now they're fine.
Kirkynut
It is clear that they rubbed on the springs at some point as they have marks / slight dents in them. I have a KAP 3 inch lift. The previous owner just apaced them out a little with penny washers until they didn't quite rub and now they're fine.
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 32
- Thank you received: 0
- Points: 0.00
Less
More
- Posts: 32
- Thank you received: 0
- Points: 0.00
Less
More
- Posts: 32
- Thank you received: 0
- Points: 0.00
Time to create page: 0.175 seconds