×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Crawler box and fitting kit
15 May 2009 13:47 #695
by TONK
Crawler box and fitting kit was created by TONK
Has anybody got fitted The off road armoury crawler box and fiting kit, this is the next big mod am looking at, always best to get advice from people that have it fitted. Is it a straight bolt of bolt on job, any info would be great.
Please Log in or Create an account to join the conversation.
15 May 2009 14:03 - 15 May 2009 14:14 #696
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Crawler box and fitting kit
Been there, done that and got the T-shirt.....
see...www.bigjimny.com/index.php?view=weblink&...m_weblinks&Itemid=61
....for my experience
Martin
see...www.bigjimny.com/index.php?view=weblink&...m_weblinks&Itemid=61
....for my experience
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 15 May 2009 14:14 by mlines.
Please Log in or Create an account to join the conversation.
15 May 2009 20:34 #701
by TONK
Replied by TONK on topic Re:Crawler box and fitting kit
Hi Martin, great site picked up some fantastic tips and mods, have you got this setup in your truck?
Please Log in or Create an account to join the conversation.
16 May 2009 04:46 #702
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Crawler box and fitting kit
Yes, I have built up an SJ410 Rocklobster box and fitted it using the Off-Road armory kit to my Jimny. All the write ups about this are the ones on this site. You will need an SJ Front propshaft and need the capability of bending the SJ Transfer Lever (lots of heat!)
How about sending in pictures of your truck. If you email any pictures to This email address is being protected from spambots. You need JavaScript enabled to view it. then I will put them up
Martin
How about sending in pictures of your truck. If you email any pictures to This email address is being protected from spambots. You need JavaScript enabled to view it. then I will put them up
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
16 May 2009 09:11 #703
by TONK
Replied by TONK on topic Re:Crawler box and fitting kit
I will take some pics over the weekend, is it ok to advertise some events on your site.
Tonk
Tonk
Please Log in or Create an account to join the conversation.
16 May 2009 09:46 #704
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Crawler box and fitting kit
Tonk,
All pictures are welcome and it is fine to advertise events on my site. I am the webmaster for tv4x4 club (www.tv4x4.co.uk) so if the event is down south and clashes with one of ours then perhaps I would have took take a different view on the event. Otherwise feel free to advertise.
Martin
All pictures are welcome and it is fine to advertise events on my site. I am the webmaster for tv4x4 club (www.tv4x4.co.uk) so if the event is down south and clashes with one of ours then perhaps I would have took take a different view on the event. Otherwise feel free to advertise.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
20 May 2009 13:46 #717
by TONK
Replied by TONK on topic Re:Crawler box and fitting kit
Has anybody used off road armourys t-box
Please Log in or Create an account to join the conversation.
Time to create page: 0.131 seconds