× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Access to switches gen4

More
05 Jul 2020 09:13 #224520 by lookonimages
I need to add some push switches here and it looks like it can be remove but i do not see visble screws to undo. My hand not fitting from back and below

Can this section be removed and how to remove it.



Sent from my SM-A505F using Tapatalk

Please Log in or Create an account to join the conversation.

More
05 Jul 2020 09:43 #224523 by Soeley
Replied by Soeley on topic Access to switches gen4
It just pulls off, no screws involved.
Pull the bottom edge to release the clips then work your way up. Some plastic Trim Removal tools are a great bonus.
The following user(s) said Thank You: lookonimages

Please Log in or Create an account to join the conversation.

More
05 Jul 2020 10:03 #224524 by lookonimages

Soeley wrote: It just pulls off, no screws involved.
Pull the bottom edge to release the clips then work your way up. Some plastic Trim Removal tools are a great bonus.

Thanks for confirmation. I was just a bit wary to start pulling and breaking things.

Much appreciated

Sent from my SM-A505F using Tapatalk

Please Log in or Create an account to join the conversation.

More
06 Jul 2020 07:45 #224568 by Grim Reaper
Could I ask where you got the extra switch for the front lights from? Is it advertised as being for a Toyota Prado/Rav 4?

Please Log in or Create an account to join the conversation.

More
06 Jul 2020 11:49 #224579 by lookonimages
It say hilux Revo on the package. Perfect fit. Dont think suzuki switches can fit any better.
Best of all it is 30% of what suzuki asks.

Luckily i could get to shop here localy specialising in 4x4 and we could test fit. So hilux revo switches are perfect fit.

Sent from my SM-A505F using Tapatalk
The following user(s) said Thank You: Grim Reaper

Please Log in or Create an account to join the conversation.

More
12 Jul 2020 02:14 #224847 by 1tamad
Replied by 1tamad on topic Access to switches gen4
I have the same head-scratcher. Where do I pull it off? Do you mean the whole dashboard panel since I cannot see a place to insert a trim removal tool. Parts are hard to come by where I live hence my fears. A pic or two would help a mech-challenged senior citizen. Sincere thanks.

Please Log in or Create an account to join the conversation.

More
12 Jul 2020 07:59 #224864 by lookonimages
Grab it from way under and it wil unclip. Pull further towards you and more wil unclip. Work up until all has been unclipped. See my photo. It is only for this section removal

Sent from my SM-A505F using Tapatalk

Please Log in or Create an account to join the conversation.

More
12 Jul 2020 09:19 #224872 by 1tamad
Replied by 1tamad on topic Re:Access to switches gen4
Got it! Thank you!

Please Log in or Create an account to join the conversation.

Time to create page: 0.086 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.