×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
G13BB engine rotation
- Owl
- Topic Author
- Visitor
-
Public
23 Feb 2020 00:30 #218918
by Owl
G13BB engine rotation was created by Owl
Hi All, which way does the engine rotate looking from the bonnet front.?
Thanks Owl.
Thanks Owl.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8809
- Thank you received: 1759
- Points: 36232.00
-
23 Feb 2020 05:05 #218920
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic G13BB engine rotation
Counter clockwise? I'm not sure now someone is asking me. Just look at the direction of the fan.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- Owl
- Topic Author
- Visitor
-
Public
23 Feb 2020 11:30 #218933
by Owl
Replied by Owl on topic G13BB engine rotation
Good idea , Just done the valve clearances, I've been rotating the engine clockwise at the crankshaft? Probably wrong? the fans not on, just put on a head gasket etc, big job.
Cant see any tell tale arrows on covers etc, cant find it in the workshop manual. Ill look at the fan and see which way the wind blows.
Unless someone can chime in, did I do it right by rotating the crank 360 degrees clockwise in between setting up the valve lash as instructed in the service manual. Dosen't say which way to rotate it, or I cant see it.
Cant see any tell tale arrows on covers etc, cant find it in the workshop manual. Ill look at the fan and see which way the wind blows.
Unless someone can chime in, did I do it right by rotating the crank 360 degrees clockwise in between setting up the valve lash as instructed in the service manual. Dosen't say which way to rotate it, or I cant see it.
Please Log in or Create an account to join the conversation.
- Owl
- Topic Author
- Visitor
-
Public
23 Feb 2020 12:16 #218935
by Owl
Replied by Owl on topic G13BB engine rotation
Clockwise, saw a pic with a arrow in workshop manual, that was for the setting up of the valves.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8809
- Thank you received: 1759
- Points: 36232.00
-
23 Feb 2020 16:08 #218947
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic G13BB engine rotation
Ah sorry, I'll try and remember that for the future, not that I have much hope!
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Time to create page: 0.095 seconds